로고

총회114
로그인 회원가입
  • 자유게시판
  • 자유게시판

    CONTACT US 02-6958-8114

    평일 10시 - 18시
    토,일,공휴일 휴무

    자유게시판

    11 "Faux Pas" That Are Actually OK To Make With Your Ghost 2…

    페이지 정보

    profile_image
    작성자 Mitchel
    댓글 댓글 0건   조회Hit 6회   작성일Date 24-02-28 02:13

    본문

    310300814_438157535072560_441431797686435441_nlow.jpgAutowatch Ghost II Immobiliser Installation

    Ghost immobilisers are the newest technology in vehicle security. They are revolutionary in how they protect your vehicle from hacking, key-cloning and even wheel jacking.

    The system has an unique disarm sequence that requires the correct pin code to begin your vehicle. This is accomplished by pressing the buttons on your dashboard or steering wheel.

    TASSA Approved

    The brand new TASSA verified audi Rs3 ghost installer-II CAN immobiliser from Autowatch is a revolutionary device that was designed to fight recent criminality trends, such as key cloning and hacking. This smart system connects directly to the CAN network of your vehicle, and prevents it from being started or driven without the proper code. The system is completely undetectable and doesn't utilize radio frequencies or keys, but instead it allows you to create an individual PIN sequence using existing buttons in your vehicle such as the ones on the dashboard or steering wheel, which you can change at any time. You can make the PIN up to 20 presses long to ensure maximum security and an emergency code that is secure provided too.

    The system communicates with the vehicle's CAN data network in order to determine when the PIN is entered. The system then sends a message to the vehicle which disables the ignition and engine, as well as shutting off crucial components such as the starter motor as well as the fuel pump. The system has a 'valet mode' that allows you to deactivate it, preventing valets and staff from driving your car without the correct key.

    Contrary to conventional immobiliser relays which can be disabled with readily available diagnostic tools for professionals, the Ghost device relies on the onboard data network to communicate with the ECU and cannot be tampered with. It's a sealed device which means that it is not able to monitor the circuits. This makes it nearly impossible for thieves to hear the tell-tale clicking sound that traditional immobilisers relays emit.

    This technology isn't susceptible to jamming tools used by high-tech thieves and is unrecognizable by other diagnostic tool because it uses the CAN data networks. This means it's a perfect anti-theft solution for any modern vehicle.

    After you've booked your TASSA approved ghost 2 immobiliser installation we'll arrange an appointment time and date to visit your business or home to complete the installation. We'll go through a complete demonstration with you. We'll then supply you with an owner's manual, an emergency card and two Autowatch window stickers as well as an installation certificate.

    Insurance Approved

    The Ghost is an aftermarket security device that shields your vehicle from the kinds of thieves who are interested in stealing your car. It prevents your engine from starting until certain buttons is activated. The only person to know this sequence is you. If your vehicle is stolen, thieves won't be able start it, and will leave your car alone in fear. Ghosts can be found in a silent mode that turns off the vehicle when not in use. It can be shut off by pressing a button.

    The system is TASSA-approved, which means that certain insurance companies will accept it as an additional security measure for your vehicle. It can be used in conjunction with other Thatcham approved security measures like trackers to protect your vehicle from being taken and also gives you security.

    The system also communicates with the ECU of your vehicle via the CAN data loop, which is inaudible to diagnostic tools. This means that a burglar cannot simply add a new key or change the ECU to get around the Ghost. The system will only allow your car to start if the correct pin code is entered. The pin code you enter is only known by you and is able to be changed at any time.

    The Ghost is an immobiliser that can easily be added to any vehicle without the need for additional key fobs or wiring. It is directly linked to the vehicle's CAN data network and a PIN number is programmed by pressing the buttons on the dashboard and the steering wheel. This code will then prevent the vehicle from starting until the correct sequence is selected first. If the code is guessable, there are safe emergency codes that can be reset via your mobile phone. There is an app that can be used on iOS and Android to eliminate the requirement to enter pins each time, thereby providing greater security.

    The shrewd

    Unlike the GPS tracker that only aids with finding your vehicle after it has been taken away, an immobiliser system stops the vehicle from being stolen in the first place. This is accomplished by preventing the engine from running until the correct code is received via the key fob or an app downloaded onto the smartphone. This is the best method to avoid wheel jacking and other types of theft as the person who steals your car has no choice but to leave your car alone or risk getting arrested.

    The ghost immobiliser is a weatherproof tiny device that is fitted inside the wiring harness of your vehicle. It is concealed and connects to the CAN data network. This means that thieves can't identify it or disable it by cutting wires. The system also has an option for service mode that can be enabled to allow your garage to work on your vehicle without having to know the passcode in order for it to begin.

    Once you have the device installed in your vehicle you'll be able arm and disarm it with your smartphone via its dedicated app. You can alter the PIN code whenever you want to ensure that you're the only one who has access to your vehicle. This is beneficial if you plan to sell your vehicle in the near future, as it can increase its potential resale value.

    The Ghost immobiliser also has a great characteristic: it's discrete and doesn't leave any marks on the interior body of your vehicle which makes it a great addition to any car. It's simple to install and operates quietly, and won't interfere with any other systems in your car.

    Many people are now putting more emphasis on the appearance of their vehicles, so having a discreet immobiliser can enhance the appearance and feel of your vehicle. This is particularly useful for people who use their vehicles to transport valuable items, since it will deter potential thieves. Ghost immobilisers work alongside any other anti-theft technology such as a tracker to provide unrivalled protection for your vehicle.

    Low Maintenance

    A Ghost immobiliser is connected directly to the CAN data network. It is virtually undetectable since it doesn't have any LED indicators or extra key fobs. It also doesn't emit radio signals, and is quiet so that thieves won't be able to detect it operating. This device can be hidden in many different locations, (even underneath the floor mats) and is a great option for those who want to secure their vehicle without sacrificing style.

    This device stops you from starting your car unless you enter an individual password. This is accomplished by pressing a series of buttons on your dashboard and the steering wheels in a certain sequence. This will stop thieves from hacking into your system, and prevent them from starting your vehicle.

    The ghost immobiliser installation will recognize this attempt to boost your signal and prevent your vehicle from starting until the correct disarming code is entered. The Ghost is different from other security systems which can be activated by entering the incorrect code. It will continue to block your car from starting until you enter the correct passcode.

    The Ghost will remain in service mode until you turn it back into 'service' which is activated by pressing the same button combination that you did to arm it (this can happen at the time you visit your dealer to perform maintenance or warranty work). This is to prevent it from being removed by unauthorised people and to ensure it is ready to be rearmed if required.

    It is also possible to transfer your Ghost to a new vehicle if you switch vehicles in the lifetime of ownership, provided that the new vehicle is compatible with. The most recent version of Ghost includes QR finger prints that are linked to International Security Register. This means that should you experience your Ghost stolen for parts, it can be traced back to you and your car. This could deter thieves from stealing vehicles equipped with Ghost as they are aware that they are safe and could be caught and arrested.

    댓글목록

    등록된 댓글이 없습니다.