Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you plan to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not onto the floor, where they could be trampled under.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to repair the window. This will also provide an obstacle to stop criminals from getting into your home. If the distance between the window and the door is significant, you may need to consider security screens that includes windows. This will give you the best of both.

2. Sagging

upvc repair windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. In time, they could develop a number of problems such as sliding. A sagging uPVC window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the size of the window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, UPVC Window Repairs but it can also be due to the mechanism of the handle wearing out. Fortunately, it's easy to repair the loose uPVC window handle yourself. You'll first need to close the window and do an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to take action if wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with a breeze It could be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, upvc window Repairs like all mechanical parts, they will wear out over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation in the factory. Sending us photos via our website will often resolve the problem. We are always happy to offer assistance.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges may also become unbalanced due to wear, which can cause gaps where the sash and frame meet. These can be easily repaired by giving them thorough clean, however if they are beyond repair it could be necessary to get them re-aligned or replaced. Second, the interlock can be disaligned. It is located on the hinge's side, and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

The next common reason for draughts is window seals. These are prone to wear or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them rather than repair them. If you are experiencing problems with your upvc windows, it's best to seek professional assistance as soon as you can.