Window Repairs

Window repairs can save homeowners money and keep their homes warm. In the event of serious damages, like broken glass or a shattered frame, a window replacement could be required.

Many other problems can be solved to prolong the lifespan of windows. The most frequent issues are:

Broken or cracked Panes

It's a rock that's been that was tossed by your lawnmowers or a tree's branch blown by strong winds, cracked windows are not just ugly, but it can also result in higher electric bills since the broken pieces let cold air to enter your home. Luckily, it's typically simple to repair windows with cracked panes.

Start by carefully removing the glass using gloves and safety glasses. You may need to use a utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is water-proof to the frame's edges. This will stop water from entering through the crack, which could cause further damage to the frame and the glass.

If you have double glazing repair-pane glass cracks that are severe could damage the gas layer that lies between the panes and make your windows less efficient in insulating. If the crack is so severe that it threatens the integrity of the window, or if the inner pane is missing it is possible to consult a professional.

Cracks caused by thermal stress can occur when there's an extreme difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If the cracks are located on two sides of a glass, it is recommended to replace it instead of try to repair it.

If your windows are cracked and not quite ready to be replaced, clear tape can do a decent job of stabilizing the crack and keeping out bugs and cold air. You can cut a nylon stocking large enough to completely cover the crack and then glue it to the surface with duct tape. This isn't a permanent solution however it's a great solution in the event of a crisis and keeps insects and cold air from entering your home. If you notice cracks on your older windows You should consult the local company to determine whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a typical issue with windows. It can damage a home's appearance and pose a safety risk. However, it is possible to repair wood that has rot. The first step is to make sure that the root of the rot has been taken care of. Look for leaks on the roof and other places that water may get into the wood.

The next step is to take off the rotten parts of the window frame. This can be done using the use of a chisel, rasp or claw hammer. Once the rotten areas have been cleared then you must replace them with fresh wood. It is recommended to make use of pre-treated wood for this task as it will be resistant to decay. If you are unable to replace the timber that has rotted you can apply wood hardener and Window Doctor Near Me filler to strengthen the damaged area. The majority of hardware stores carry this type of product. To get the best results, make sure you follow the instructions on the product label.

After you have repaired the rotten areas of the windowsill, it's important to protect the repaired area. This can be done by applying an water-resistant wood sealant. A product like Sikkens is a good choice to accomplish this task.

Use a two-part epoxy in order to safeguard the wood from further damage. This product is easy-to-apply and leaves a nice finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried you can sand the surface of the wooden. Start with a rough sandpaper then move to a smoother grade.

You do not want to expose the damaged area to more moisture. It is recommended, so, to cover the repaired surface with an oil-based prime that will protect it from moisture. After that, you can reapply the wood sealant that is waterproof.

The Won't open

A window that won't open can be the result of a variety of reasons. Wood frames can warp during wet weather, the house might have sunk or someone could have closed it for security reasons. With a bit of patience and the right tools, you can unlock most stuck windows.

The accumulation of gunk or debris can be a major cause of the window not opening. Acme Glass notes that dirt and grime accumulates over time on the sliding tracks, hinges and locks. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can help to prevent oxidation and keep your window operating properly.

Stuck windows can also be the result of the breaking or loosening of the pulleys used to raise and lower the window. These components may lose tension and get blocked especially when the window is two or more stories above the ground.

If you are having difficulty opening a door, use a pry-bar to gently push the window open. Put a block on the frame of the window doctor near me to give the pry bar more leverage. Be careful not to scratch the wood or the window. You can also try running a hair dryer across the edges of the frame for a few minutes to warm the wood and assist it to move more easily.

A damaged spring can be the cause of windows that aren't able to lift or lower. You'll need to refer to the owner's manual for additional details based on the manufacturer of your windows.

If you've tried cleaning the moving parts of your windows and then lubricating them but they're still not opening it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows slip from functional to useless because windows that aren't properly shut can leave your home vulnerable to water damage and burglary. Contact our team for more information on our replacement windows and services today!