Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and window Replacement Near me durable, as well as long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However, if windows with double panes are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this case, you will need to find some plastic spacers to assist the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor and could be trampled.

It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is large, you may want to consider using the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action immediately if you discover that your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your upvc repairs windows are watertight and secure from draughts.

uPVC handles could also loosen. This is usually due to screws that have loosened over time, but it can be due to the mechanism of the handle wearing out. It's a good thing that it's simple to fix a loose uPVC Window replacement near me handle yourself. First, you'll need to close the window and perform a test fit. The corner joints of the sash must align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to take action if awake each day to find mouldy walls and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open in a breeze, it may be hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process but it can be easier with someone else to help hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you advice.

It is also crucial to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. First, the hinges due to wear and tear can become misaligned, this can cause gaps to develop where the sash joins the frame. If they are damaged beyond repair, it could be required to realign them. In addition, the interlock could also become unbalanced. This is located on the hinge side and may need to be cleaned. In some instances it might be necessary to replace these.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it may be more cost-effective to replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional immediately.