Repairs to upvc window repairs Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. However, if you have double-pane windows that are held in place by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor and could be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might think about the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need open the window to access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, Upvc window repairs tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the old caulking may need to be removed before a fresh layer can be applied. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. This can be easily fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or uPVC window repairs if it opens with an ease. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window but it's much simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrow on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to offer advice.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become disaligned as a result of wear, which can cause gaps where the sash and frame meet. If they are beyond repair, it could be required to realign them. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it is possible to just give them a clean but in some instances it could be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce the risk of draughts.

Lastly, one of the most effective ways to reduce drafts is to use an draught excluder. These are typically made of fabric that are filled with some sort of filler and can be positioned on top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as possible.