Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like aluminum or timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case you'll need source some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, pvc window repairs you may be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they can suffer from a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll have to open the window to access the frame. Then, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you are happy with the size of the window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles could also become loose. This is usually due to screws that have become undone over time, but it could also be due to the mechanism of the handle wears out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. You'll first need to close the window and do a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is important to act if you wake up every morning to find mouldy walls and wet floors. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the problem is, the old caulking may have to be removed. It is important to remember that when it is about upvc windows repairs window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens with an ease. These are easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. It's easy to change a Pvc Window Repairs hinge, but it's easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by checking for the arrows on each hinge. This indicates which way the window should open.

The issue could be caused by opening the window improperly or by a poor installation at the factory. Sending us photos via our website will often solve the issue. We are more than happy to provide assistance.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also decreases the chance of windows sticking and prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. First, the hinges due to wear and tear may become displaced, which causes a gap to form where the sash meets the frame. If they're beyond repair, it could be necessary to have them realigned. In addition, the interlock could also become unbalanced. This happens on the hinge's side, and might require to be cleaned. In some instances it might be necessary to replace these.

The seals may wear out or get damaged over time, allowing air to escape. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder, these are typically fabric tubes that are filled with some type of filler. They can be put on top of your windowsill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a lifespan and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it is recommended to seek help from a professional immediately.