Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is important to make sure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However, if you have double pane windows that are anchored by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this situation, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and pvc Window Repairs water from entering the home until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap between the door and the window is large, you might need to consider security screens that includes a window repair. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to unblock the windows to get at the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and then perform an initial test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is important to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the Pvc Window Repairs. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. This can be easily fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze it could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's easy to change a window hinge but it's much easier if someone helps you to hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or due to poor installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to give assistance.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also due to wear and tear may become displaced, which will cause a gap to form where the sash meets the frame. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, may be misaligned. Again, it is possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a sort of filler and can be put on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually get worn out and it may be cheaper to replace them than to repair windows them. If you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as you can.