Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like aluminum and timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you're planning to try to remove the glass panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, upvc window repair not onto the floor, upvc Window repair where they could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the distance between the door and the window is large, you might need to consider an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they are susceptible to a range of problems including sagging. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in the right position.

If you can't reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. Often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to fix a loose upvc window repair near me window handle yourself. First, you'll need to close the window and perform an initial test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks from windows can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the issue the old caulking may require removal before a new layer is applied. It is essential to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. Again this can easily be fixed by an upvc window repair window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with a breeze, it may be hinges at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is very easy to change the hinges on a window, but it's easier if someone else helps you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation in the factory. This can often be resolved by sending us a picture on our website. We will be more than happy to give you suggestions.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become disaligned as a result of wear, causing an opening between the frame and sash. If they're beyond repair, it could be necessary to get them re-aligned. The interlock, which is on the hinge side of the window and can also be misaligned, and again it's feasible to give them a good clean, but in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.