로고

총회114
로그인 회원가입
  • 자유게시판
  • 자유게시판

    CONTACT US 02-6958-8114

    평일 10시 - 18시
    토,일,공휴일 휴무

    자유게시판

    Introduction To The Intermediate Guide For Ghost 2 Immobiliser Install…

    페이지 정보

    profile_image
    작성자 Angelika
    댓글 댓글 0건   조회Hit 9회   작성일Date 24-05-03 15:50

    본문

    Autowatch Ghost II Immobiliser Installation

    Ghost immobilisers are a recent technological advancement in security for vehicles. They are a breakthrough in the way they safeguard your vehicle from hacking, key-cloning and even wheel jacking.

    The system is based on a unique disarm sequence, which requires the correct PIN code to start your car. This is done by pressing the buttons on your steering wheel or dashboard.

    TASSA Approved

    The TASSA-certified Ghost-II CAN from Autowatch is an innovative device designed to fight the most recent automobile crime trends like key cloning, hacking, and ghost 2 immobiliser installation other forms of theft. This innovative system connects directly to the CAN network of your vehicle, and prevents it from being started or driven without the correct code. The system is undetectable, and does not use radio frequencies or key fobs. Instead, it lets you create a unique sequence of PINs with buttons on your dashboard or the steering wheel, which you are able to modify at any time. You can design the PIN up to 20 times long to ensure maximum security. an emergency code that is secure is provided too.

    The system works by communicating with the vehicle's CAN data network in order to detect when a specific PIN has been entered. This is then sent to the vehicle, which disables engine and ignition and shuts down critical components such as the starter motor and the fuel pump. The system has a 'valet mode' that lets you deactivate it and prevent valets or staff from driving your vehicle without the correct key.

    Contrary to conventional immobiliser relays that can be deactivated using easily accessible diagnostic tools for professionals, the Ghost device uses the onboard data network to communicate with the ECU and cannot be altered with. It's a sealed unit so it is not possible to monitor the circuits, which makes it nearly impossible for thieves to detect the distinctive clicking noise that traditional immobiliser relays emit.

    This technology isn't susceptible to jamming tools utilized by high-tech thefts and is unrecognizable by other diagnostic tool since it uses the CAN data networks. This means it's a perfect anti-theft tool for any modern car.

    After you've booked your TASSA approved ghost 2 immobiliser, we'll set up an appointment and time to visit your home or business to carry out the work. We will walk you through the entire process with you and give you an owner's manual, emergency card and two autowatch ghost installation birmingham window sticker and an installation certification.

    Insurance Approved

    The Ghost is an aftermarket security gadget that protects your vehicle from the kinds of thieves who would be looking to steal your car. It works by stopping your engine from starting until a specific sequence of buttons is activated. The only person who can know this sequence is you. If your car is stolen, thieves won't be able start it, and will leave your car alone out of fear. The ghost also comes with a silent mode which disables the vehicle if not in use. It can be turned off by the press of a button.

    The system is fully TASSA-approved, meaning that certain insurance companies will accept it as an extra security measure for your vehicle. It can be used in conjunction with other Thatcham-approved security measures, like trackers, to prevent your vehicle from being stolen. This gives you peace of mind.

    In addition, the system communicates with your vehicles ECU using the CAN data circuit. This is undetectable by diagnostic tools and completely silent. This means that thieves can't simply insert a new key or swap the ECU to bypass the ghost 2 Immobiliser installation. The system will only allow your vehicle to start only if the correct pin number is entered. This unique pin code is only accessible to you and can be changed at anytime.

    The Ghost is an immobiliser that can easily be incorporated into any vehicle without the need for additional key fobs or wiring. It is directly linked to the vehicle's CAN data network and a PIN code is programmed by pressing the buttons on the dashboard and the steering wheel. This code prevents the vehicle from starting unless the correct sequence of events has been chosen first. If the code is guessable, there are secure emergency codes which can be reset using your mobile phone. There is an application that can be used on iOS and Android to decrease the requirement to enter pins every time, providing greater security.

    Discreet

    Contrary to the GPS tracker, which aids with finding your car after it has been taken away, an immobiliser system prevents the vehicle from being taken in the first place. This is achieved by preventing the engine from starting until the correct code is received via the key fob or via an app downloaded to the smartphone. This is a great method to avoid wheel-jacking as well as other thefts, as the thief is forced to leave the vehicle alone or risk being arrested.

    The ghost immobiliser, which is a tiny weatherproof device, fits inside your vehicle's wiring harness. It is connected to the CAN data network and is hidden away so that thieves cannot find it or disable it with simple wire cutting. It also has an option for service mode that can be activated so that your garage can work on your vehicle without having to know the passcode required for it to start.

    After you've had the device attached to your vehicle, you'll be able to arm and disarm it using your smartphone by using its specialized application. You can alter the PIN number whenever you'd like to ensure you are the only one who has access to your vehicle. This is helpful if you plan to sell your car in the future and it can increase the price of resales.

    Another great feature of the Ghost immobiliser is that it's discrete and won't leave any marks on the body of your vehicle which makes it a great option for any vehicle. It's easy to install, operates quietly and won't interfere with any other systems in your car.

    Many people are now putting more focus on the appearance of their vehicles, so having a discreet immobiliser can improve the appearance and feel of your vehicle. This is especially attractive for those who frequently use their cars to transport valuable items, since it can keep thieves from targeting them. Ghost immobilisers work in conjunction with other anti-theft technology like trackers to provide unrivalled security for your vehicle.

    Low Maintenance

    A Ghost immobiliser works by connecting directly to your CAN data network. It is almost undetectable as it doesn't use any LED indicators or additional key fobs. It does not emit radio signals, and is also quiet, so thieves cannot hear it. It can be placed in a variety of places (even under the floor mats), and is a great option for those looking to protect their vehicle, without sacrificing its appearance.

    This device blocks your car from starting unless you enter an individual password to you. This is done by pressing a series of buttons on your dashboard as well as the steering wheels in a certain sequence. This will stop thieves from hacking into your system and stop them from starting the vehicle.

    The ghost installer will recognize this attempt to increase the signal and stop your car from starting until the correct disarming code is entered. The Ghost is unlike other security systems that can be activated by entering the wrong code. It will continue to prevent your vehicle from starting until you enter the correct passcode.

    308785165_499195788347328_5859105632268553197_nlow.jpgThe Ghost will remain in service mode until you turn it back into "service" which is activated by pressing the same button combination as you did to arm it (this can happen at the time you visit your dealer to perform maintenance or warranty work). This is a security measure to ensure that it's not taken away by anyone who is not authorized and then rearmed and returned to service mode if required.

    If you decide to switch vehicles during your ownership it is possible to transfer the Ghost to the new vehicle, provided that the new vehicle is compatible. The latest Ghost includes QR finger prints that are linked to International Security Register. This means that if you have your Ghost stolen to replace parts, it will be traced back to you and your vehicle. This will stop thieves from stealing vehicles fitted with Ghost because they know that the vehicle is secure and they will be at risk of being caught and convicted.

    댓글목록

    등록된 댓글이 없습니다.