Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and aluminum.

It is important to clean and oil upvc window repair near me doors and windows on a regular basis. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. However, if windows with double panes are secured by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor where they could be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional arrives to repair the window repairs near me. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the distance between the door and the window is large, you might need to consider security screens that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. In time, they could develop a number of problems, including sliding. A window that is sagging can cause problems with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and draught-proof.

UPVC handles can also become loose. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and perform an experiment fitting. The corner joints of the sash must align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on how severe the issue is, old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease, it may be hinges that are at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is very easy to replace a hinge on a window but it's much simpler if you have someone to help hold the frame.

Check that the uPVC hinges open and close in the proper direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or by inadequate installation at the factory. This can often be resolved by sending us a photo on our website. We will be pleased to offer you advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. The ideal time to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also be unbalanced due to wear, which can cause a gap between the frame and sash. They can be repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to get them realigned or replaced. The interlock, which is located on the hinge side of the window and can also become misaligned, uPVC window repairs again it is possible to just give them a good clean, but in some cases it might be necessary to have them replaced.

The seals may wear out or UPVC Window Repairs become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. These will keep your home warm by blocking cold air.

With a little maintenance and repairs, your upvc windows will provide a great level of insulation and security for your home. It is crucial to recognise that all windows have a life span and there may come the point when it's more economical to replace them than fix them. If you are experiencing problems with your upvc windows, it's recommended to seek help from a professional immediately.