로고

총회114
로그인 회원가입
  • 자유게시판
  • 자유게시판

    CONTACT US 02-6958-8114

    평일 10시 - 18시
    토,일,공휴일 휴무

    자유게시판

    This Is The Ghost 2 Immobiliser Installation Case Study You'll Never F…

    페이지 정보

    profile_image
    작성자 Leta Whiteside
    댓글 댓글 0건   조회Hit 6회   작성일Date 24-05-01 02:12

    본문

    Autowatch Ghost II Immobiliser Installation

    Ghost immobilisers are a recent technological advancement in security for vehicles. They are groundbreaking in the way they protect your vehicle from hacking, key-cloning and even wheel jacking.

    The system requires the correct PIN code in order to start your car. This is accomplished by pressing the buttons on your steering wheel or dashboard.

    TASSA Approved

    The new TASSA verified Ghost-II CAN immobiliser from autowatch ghost immobiliser installation is a groundbreaking device created to combat recent car criminality trends, range Rover Sport ghost installer such as key cloning and hacking. This sophisticated system can connect directly to your vehicle's onboard CAN data network, stopping your vehicle from being driven or started without the correct code. The system is completely undetectable, and doesn't use radio frequencies or a key fob, instead it allows you to create a unique PIN sequence by using existing buttons in your vehicle, like those on your dashboard or steering wheel that you can alter at any time. You can create a PIN up to 20 presses long to ensure maximum security and an emergency code that is secure available too.

    The system communicates with the vehicle's CAN data network to determine when the PIN is entered. The system is then sent to the vehicle that disables the ignition, engine and shuts off critical components like the starter motor and the fuel pump. The system comes with a "valet' mode which allows you to disable it, preventing valets and employees from driving your car without the correct key.

    Contrary to conventional immobiliser relays which can be disabled with readily available diagnostic tools for professionals, the Ghost device relies on the onboard data network to communicate with the ECU and is not able to be tampered with. It's a sealed unit which means that it is not able to monitor the circuits. This makes it impossible for thieves to hear the tell-tale clicking sound that traditional immobilisers relays produce.

    This technology is also not susceptible to jamming devices used by high-tech thieves. Additionally, because it works on the CAN data network, it's not detectable by other diagnostic tools. This means it's an ideal anti-theft solution for every modern car.

    We will visit your home or office to perform the installation once you have scheduled the installation. We will go through the full demonstration with you and provide you with an owner's manual, emergency cards as well as two Autowatch window stickers, and a installation certificate.

    Insurance Approved

    The Ghost is a security device that is installed aftermarket and protects you from the types of thieves interested in stealing vehicles. It prevents your engine from starting until a specific sequence of buttons are pressed. This sequence is only recognized by you, and when your car is stolen thieves, they will not be capable of starting it and will likely leave your vehicle to avoid being caught. Ghosts have a silent mode that disables the vehicle when not in use. It can be turned off by pressing a button.

    The system is TASSA-approved, meaning that certain insurance companies will accept it as an extra security measure for your vehicle. It can be used in conjunction with other Thatcham-approved security measures, like trackers to help protect your vehicle from being stolen. This gives you assurance.

    The system also communicates with the ECU of your vehicle through the CAN data loop which is completely inaudible to diagnostic tools. This means that thieves cannot simply add a new key or replace the ECU to bypass the Ghost. The system will only start your vehicle if you enter the correct pin code. This unique PIN code is only known by you and can be changed at any time.

    The Ghost is an immobiliser that can be added to any vehicle without the requirement for additional key fobs or wiring. It is directly linked to the vehicle's CAN network, and a PIN code is programmed using the buttons on the dashboard or steering wheel. This code will stop the vehicle from starting until the correct sequence has been chosen first. If the code is guessable, there are secure emergency codes that can be reset via your mobile phone. In addition to this there is a simple application available for iOS & Android which eliminates the requirement to enter your pin every occasion, ensuring more hassle free security.

    Discreet

    Contrary to a GPS tracker that only aids in locating your car after it has been taken away, an immobiliser system prevents the vehicle from being stolen in the first place. This is done by preventing the engine from starting unless it is able to receive the correct code through the key fob, or a smartphone application downloaded to it. This is a fantastic way to stop wheel-jacking and other forms of theft because the person who is stealing has no choice but to leave the car alone or risk being arrested.

    The ghost immobiliser is a weatherproof tiny device that fits inside the wiring harness of your vehicle. It is hidden and is connected to the CAN data network. This means that thieves cannot detect it or disarm by cutting wires. The system is equipped with a service-mode that can be activated to let your garage work on your vehicle without needing to know the password.

    Once the device is installed in your vehicle, it can be de-armed and armed with an app on your smartphone. You can even alter the PIN code at any time to ensure that only you have access to your vehicle. This is helpful if you plan to sell your car in the future, as it will increase the cost of reselling.

    Another benefit of the Ghost immobiliser is that it's discrete and leaves no marks on your internal car's body, making it an ideal addition to any vehicle. It's simple to install it, is silent and will not disrupt any other systems in your car.

    Many people are putting more emphasis on the appearance of their cars So having a discrete immobiliser can improve the look and feel of your car. This is especially attractive for those who frequently utilize their vehicles to transport valuable items, as it will help to stop potential thieves from pursuing them. A ghost immobiliser will work in conjunction with any other anti-theft technology such as a tracker to provide unrivalled protection for your vehicle.

    Low Maintenance

    Ghost immobilisers function by connecting directly to the CAN data network. They are virtually unnoticeable, since they do not use LED indicators or additional key fobs. It does not emit radio signals, and is also quiet, so thieves cannot hear it. The device can be put in a variety of places (even under the floor mats), and is an excellent option for those who want to safeguard their vehicle without compromising on its appearance.

    This device blocks your car from starting unless you enter a password that is unique to you. This is done by pressing a combination of buttons on your dashboard as well as the steering wheels in a specific sequence. This will stop thieves from cloning or hacking into your system and stop them from starting the vehicle.

    Thieves can also attempt to increase the signal strength to gain access to your vehicle, however the Ghost will be able to detect this and stop your vehicle from starting until input the correct disarming sequence. Contrary to other security systems that can be activated by entering a incorrect code or entering the wrong code, the Ghost will continue to block your vehicle from starting until you input in the correct passcode.

    The Ghost remains in service mode until you turn it back into 'service' which is activated by pressing the same button combination as you used to arm it (this can be done when you go to your dealer to perform maintenance or warranty work). This is to protect it from being removed by unauthorised people and to ensure it is rearmed when required.

    311159893_995841588058766_6213964028136182559_nlow.jpgIf you decide to change vehicles in your ownership it is possible to transfer the Ghost to the new vehicle, provided that the new vehicle is compatible. The latest version of Ghost also comes with QR finger print stickers that are linked to the International Security Register, meaning that if your Ghost is stolen for parts it can be traced back to you and your vehicle. This could deter criminals from stealing vehicles fitted with Range rover sport ghost installer as they are aware that they are secure and are less likely to be caught and detained.

    댓글목록

    등록된 댓글이 없습니다.