Repairs to uPVC Windows

uPVC is a fantastic option for upvc window repairs modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when windows with double panes are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a great idea tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time they can suffer from a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll need open the window repairs near me to get to the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you're satisfied with the fit of your window, tighten the screws to hold them in the right position.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loosen. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and then perform an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and uPVC window repairs floors that are wet. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Based on the severity of the problem the old caulking might need to be removed before a fresh layer is applied. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze It could be hinges at fault. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. It's very simple to change a window hinge however it is easier if someone helps you hold the frame.

Make sure that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window repairs near me should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are happy to give assistance.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more smoothly. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. Firstly the hinges, again due to wear and tear could become misaligned. This can cause a gap to form where the sash joins the frame. If they're beyond repair, it may be necessary to get them re-aligned. The interlock may also become misaligned. This happens on the hinge side and might require to be cleaned. In some cases, it may be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is cheaper to replace them than to repair them. If you have any problems with your Upvc window, it's best to consult an expert as soon as possible.