Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the distance between the door and the window is substantial, you may want to use security screens that has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they are susceptible to a range of problems including sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows to access the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to close your window and do a test fit. The corner joints of the sash should align with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be applied. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more extreme situations, you may have to replace the window repair near me.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze it could be hinges at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is essentially a simple process but it can be easier when you have a person to assist in holding the frame in place.

Make sure that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window repairs improperly or due to a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to offer assistance.

It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form where the sash joins the frame. If they are beyond repair, it might be required to realign them. The interlock, which is located on the hinge of the window, may also be misaligned, and again it's feasible to give them a clean but in some instances it could be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor window repairs temperatures, and reduce draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes filled with some type of filler. They can be put on top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be more cost-effective to simply replace them than to repair them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.