Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is large, you might want to consider using the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a number of problems such as sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows to access the frame. With the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you are unable to move the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. It is crucial to replace your seal as soon as you can in order to ensure that your upvc window repair near me window watertight and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need close your window and do a test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and UPVC Window Repairs also hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the caulking used previously might need to be removed before a new layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it blows open with a breeze. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like all mechanical parts hinges will wear out over time. It's very simple to replace a hinge on a window however it is easier if someone helps you hold the frame.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also be misaligned due to wear, which can cause a gap where the sash and frame meet. They can be repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to get them realigned or UPVC window repairs replaced. The interlock, which is located on the hinge of the window repairs near me, may be misaligned. Again, it's feasible to give them a clean but in some cases it might be necessary to have these replaced.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and lessen draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric which are filled with a sort of filler and can be placed on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it's best to seek professional assistance immediately.