Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. However If you have double-pane windows that are held in place by internal beading it will be more difficult to take out the old panes and put in new ones. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled under.

It's a great idea tape the gap once the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. As time passes, Upvc window repairs they may be affected by a variety of issues that include sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. It's important to take action as soon as you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for fitting. If you're satisfied with the size of the window, tighten the screws to hold them in place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and UPVC Window Repairs reverse the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Based on the severity of the issue the old caulking may require removal before a new layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is related to the seal, not the frame. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze, it may be hinges at the fault. These are easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Like any mechanical part, hinges can be damaged over time. Changing a window hinge is essentially a simple process, but it's easier when you have a person to help hold the frame in place.

Make sure that the uPVC hinges open and close in the right direction. This can be done by looking for the arrow on each hinge. This shows which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain manner or because of poor installation at the factory. Sending us a photo via our website will often resolve the problem. We are more than happy to provide assistance.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become disaligned as a result of wear, causing gaps between the frame and sash. If they're beyond repair, it may be necessary to have them realigned. In addition, the interlock could be unbalanced. This happens on the hinge side and may need to be cleaned. In certain instances it is possible to replace the hinges.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window repairs near me window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes filled with some type of filler. They can be positioned on the windowsill on top. These will help to block out cold air and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to simply replace them rather than repair them. So, if you are having issues with your upvc windows, it's recommended to seek help from a professional immediately.