Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence up to 20 presses. This then authorizes the start-up of your vehicle.

Simple PIN Code Change Process

Many owners are upgrading their security because of the rising number of vehicle thefts. There are a variety of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. While a tracking device can help you find your car in the case of theft, it does not stop the crime from happening in the first place. An immobiliser, on other hand does exactly what it says on the tin: it disables the engine of your vehicle so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your vehicle.

By using the buttons that are already present in your car, the ghost device creates a unique sequence which must be entered before the car's engine starts. This can be done using the heater, window or indicator stalk buttons. Additionally, there is also an app for mobile devices that can act as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This is especially beneficial if you have to give your car away to a valet service or parking, as the immobiliser will still be active and not deactivated.

The Ghost is an unique and Ghost immobiliser innovative device that operates with your vehicle's buttons rather than as a standalone device. This means that it is not just a highly effective security measure against theft from your vehicle but can also be transferred to any future vehicles you may own, making it more valuable than the traditional lock on your steering wheel.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security system that protects your car from key cloning and hacking. It also blocks ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be placed in the vehicle without the need for additional wiring and has been thoroughly tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices that are an approach used frequently by car thieves to circumvent existing immobilisers.

The benefit of CAN data over traditional systems is that they operate in a silent manner. It isn't detected by sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons on your vehicle, such as the steering wheel, centre console, or door panels, to create a an unique sequence of disarming. You can make this sequence up to 20 presses long to increase security. The iPhone app permits one, authorized connection, with a pairing code that is unique to the Ghost and communication between the two is encrypted.

The Ghost also prevents thieves from stealing a new key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only start only if a valid PIN has been entered. It can also be put in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to hand your car over to a valet service or to be serviced without needing to enter a PIN.

Each vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects electronic signals that block the system of your vehicle from going through its normal initialization process until you enter an individual passcode. The system can be activated and deactivated by using your smartphone's app without the need for additional wires.

The factory-installed immobilisers function by using a transponder that is integrated into the key. It transmits a message to the ECU. The car will begin to start if the correct code is transmitted. If, however, the transponder of a different vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle start and be stolen. A South African company that is at the forefront of car security systems technology created the Ghost immobiliser. It protects your car from key cloning, hacking and even key theft. The only way thieves could take your car is physically towing it away and even then they wouldn't be able to drive it.

ghost immobiliser review makes use of buttons on your vehicle, such as the indicator stalk, the steering wheel, as well as the doors, to generate unique PIN codes which must be entered to use your car. This is performed without the need for extra hardware such as keys-fobs, and can be up to 20 presses long. It is also inaccessible to diagnostic equipment and does not transmit radio frequency signals, which means thieves cannot use sophisticated RF scanning or code grabbing technology to determine if a security system has been installed.

Ghost is harder to remove than car alarms, which require disarming by pressing several buttons. This makes it an excellent supplement to a GPS tracker that can assist in locating your car after it's been taken.

Emergency PIN code override

You don't have to look very far on social media for stories or videos of vehicles that were stolen using the most advanced technology tools. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle with your original keys.

The Ghost immobiliser was specifically designed to prevent this and offer an extra layer of security in order to protect your vehicle from being targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code is entered alongside your original key fob to prevent the engine from starting. The unique override pin is on the black card that you will receive following installation. It's easy to remember since there aren't any LEDs.

The device is hidden in the vehicle's wires and does not emit radio signals, so it cannot be recognized by criminals using diagnostic software that can recognise what type of security system you have installed. This makes it a great alternative to an electronic device for Ghost Immobiliser tracking.

Contrary to most security systems, which have a relay in the engine bay, these CANBUS Immobilisers connect with the car's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely through the use of a digital block of commands that is sent to both the ECU and the engine.

They can also be connected to a separate analogue alarm immobiliser or tracker. This should be decided prior to installation. They are also fully service/valet mode compatible and are a great alternative to a tracker when you have your car checked for repairs to an electrical issue at the dealer.

Service/Valet Mode

In recent years there has been a rise in the number of vehicles that are stolen without owners' keys. With the ease of access to key cloning equipment and door lock pick sets, it is now much easier for thieves to steal your prized possessions. We have created the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if your keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data loop. It's completely quiet since it doesn't utilize radio frequencies or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also protects you from adding an ECU or key to circumvent the system, since only the PIN code allows the engine to start.

The device is hidden in your car and can be accessed by existing buttons on your steering wheel, center console and door panels. A unique and reversible PIN code sequence that can be as long as 20 digits must be entered before you are able to start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car being driven away or started in the event that a PIN code hasn't been entered first. If you're driving away with the device in motion it will display an indicator on your dashboard that will flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function just as normal. If you don't enter your PIN at this time, the indicator will continue to flash and require a new pin code every time you attempt to start your vehicle.