Choosing uPVC Replacement Window Handles

Nearly all customers agree that these windows handles made of upvc are easy to fit and feel like high-quality. It's important to know that the handle you pick for your window should be suitable for ydelection.com the window.

The most important aspect is the step height which is the distance from the nose of the handle to the base or frame. Other considerations include lockable designs and mechanisms.

Replacement parts

There is a variety of replacement window handles made of upvc available to buy. There are a variety of styles and colours to choose from, and you're certain to find something that is compatible with your windows. It's easy to buy on impulse especially when the handle fails, so it's best to take your time and check the details prior to committing to buying a replacement. The first step is to be aware of the type of handles made from upvc you have and what the differences are between them. The table below shows the most common handles to help you find the one that will fit your upvc windows.

Most double-glazed windows today come with epag handles. They are usually affixed to the frame by two screws that screw in from both above and below.

They have a spindle bar on the back that can come in a variety of sizes and this will determine how they work (either left or right handed). This is why it's important to determine the handle size to ensure that you're ordering the correct replacement.

The arm is attached to the frame with two bolts, much like the Espag handle. However, the arm has a low projection so that it won't poke your blinds. This is a good option for blinds on your windows made of upvc and you want to make sure the handle will blend in with the blinds.

Cockspur handles are similar to Espag handles, however they have a nose which closes over a wedge that rests on the window frame. This kind of handle can be found on some older wooden and upvc windows.

Tilt and turn handles are typically found on casement windows and can be operated either by turning the handle or pressing at the top of the window. This allows you to open the window from inside and clean it from outside without having to climb a ladder or step across the garden fence. These are also an excellent option for those with limited mobility and improve security and access in the home.

Tips and hints

There are a number of different kinds of uPVC window handles, and lots of people will need to replace them at some point. It's important to have some tips and tricks to make the job easier.

Find out what kind of handle is located at your residence. Depending on the kind of handle and the locking mechanism, it may be necessary for you to replace the handle and lock. For instance, if the shoot bolts (espag) and roller cams are jammed or seizing the handle, you'll need to change them, as well as the handle itself.

Fortunately, the majority of uPVC handles follow industry standards and are very alike. This allows for a relatively simple process. The first step is to remove the screw covers from the handles. These are usually pozi-drive screws. Once these are removed, you can take the handle apart.

When you have the handle separated it is an ideal idea to take a note of how much of the spindle is protruding from the base of the handle. This will allow you to determine the length of the spindle for an alternative handle. Simply take note of the length the square peg sticks out of the bottom of handle.

This is especially important for inline uPVC handles for windows, since they are always straight and will only open left or right. They will not work in the middle. If you're not sure of the kind of handle you have in your home, it can be a good idea to take the handle from your neighbor's home and see how it operates to get an idea.

You can also determine the handedness of a uPVC window by observing the way the handle turns when it is in use. Handles can be turned either clockwise or counter-clockwise. If you're not sure, you can always ask someone else to open the window with the handle, and figure out how it functions in this manner.

Measure the spindle

Choosing the correct replacement handle for your windows could be difficult as not all handles are the same size. It is essential to accurately measure the spindle when fitting the new handle. This will ensure that the handle fits. There are a variety of uPVC handles that operate in various ways. It is crucial to know which type you have, and what locking mechanism you are using.

Espag handles have a spindle that extends from the rear of the handle and goes into the lock gearbox that is within the window frame. When you turn the handle, this is then a way to turn the lock in the gearbox to open the window. They are usually used on uPVC casement windows. They can be locked with keys to provide extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by an "nose", which closes over a wedge shaped striker block. They are also easy to use and can be locked with keys. They can be a little more difficult to locate replacements for because they aren't as well-known as the espagnolette handle.

If you own a tilt-and-turn uPVC, you will require a replacement window handle handle with an alternative locking system. This will be able to tilt the window open but also rotate it around to open it fully. You will need to ensure that the handle you choose has a length at least 55mm, or it will not be able to get into the window frame.

The same method can be used to remove and replace the uPVC handle. However, you will need to take care when you remove it. It might be necessary to open the window wider than normal to reach both screws that attach it to the frame. Once you have put in your new uPVC handles and checked that they are in the proper position and tighten the screw covers and test the lock to ensure it works properly.

Replace the handle with the new one.

Once you have the right replacement handle, it will be easy to screw it into the correct position. It will require a screwdriver and an electric one might be easier. When screwing the screws in, it is important not to over tighten the screws as this can cause the handle to crack or warp.

Another important step to take when installing the new handle is to put in the spindle. This is the component that is inserted into the handle and controls the locking mechanism inside the window. It is essential that the component is properly fitted because this will permit the window to open and shut securely.

There are a variety of different kinds of uPVC window handles. These include:

Espagnolette Handles - These are inline handles that can be used to windows that tilt and turn to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that is useful for windows in hard-to-reach locations.

Tilt and turn handles These are used to control the opening and closing mechanisms for tilt and turn. They also move windows.

The majority of uPVC window frames come with these. They are commonly called 'Bay windows in the UK.

If your uPVC window handle is damaged, it can be extremely frustrating. However, there is no need to replace the entire uPVC window just because of a broken handle. There are many simple ways to fix and replace a broken uPVC window handle.

You can fix your broken window handle quickly by identifying the model and measuring the spindle. It is important to be patient and ensure safety when working with windows or tools, however, this is a easy task. It could mean the difference between having a secure and secure home or having a window that can be easily opened. Bridgewater Glass is the place to go if you have questions or need to speak with an expert about replacing your window handle. We have a team of experienced and knowledgeable professionals who are able to assist you with any problems you may be facing.