Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handles are easy to fit and feel as good quality. It is important to be aware that the handle you select for your window has to be suitable for the window.

The step height is the most important factor. This is the distance between the handle and the base or frame. Other factors to consider are lockable styles and mechanisms.

Replacement parts

You can buy a variety of replacement handles made of upvc. They come in a variety of colours and styles so there's sure to be something to suit your existing windows. It's easy for you to buy something on impulse especially when the handle is damaged. So it's best to do some research before purchasing the replacement. The first thing to consider is what kind of upvc handle do you currently have and what the difference between the kinds is. The table below outlines the most commonly used handles to help you find the one that fits your windows made of upvc.

Most double-glazed windows today have epag handles. They are typically attached to the frame by two screws which screw into the frame from both sides.

They come with a spindle bar on the back which can be of a variety sizes, and this will determine how they work (either left or right handed). This is the reason it's crucial to take a measurement of the handle you have to ensure you're getting the right replacement.

The arm is attached to the frame by two bolts, similar to the Espag handle. The arm has a low projection to ensure that it doesn't scratch your blinds. This is an ideal choice if you have blinds on your windows made of upvc and want to ensure that the handle will blend with them.

Cockspur handles are similar to Espag handles, but they have a nose which closes over a wedge which sits on the frame of the window. This type of handle is commonly found on older upvc windows as well as on some wooden windows.

Tilt and turn handles are typically found on casement windows and can be operated by turning the handle or pushing at the top of the window. The window is opened from the inside, allowing you to clean from outside without having to go out on a ladder or step over the fence. They are ideal for those with limited mobility, and can increase security and accessibility in the home.

Tips and tips and

There are many different kinds of uPVC window handles, and many people will find themselves replacing them at some time. If this happens it's best to be aware of a few tricks and tricks that will assist in making the task go as smoothly as it can.

The first thing you should do is check what type of handle you have at home. Depending on the kind of handle and the locking mechanism, it could be necessary for you to replace the lock and uPVC Replacement Window Handles handle. If the roller cams and shoot bolts (espags) are stuck or are getting stuck, you'll need to replace them as well as the handle.

Fortunately, the majority of uPVC handles adhere to industry standards and are very similar. This allows for a relatively easy process. First, take off the screw covers on the handles. They are typically pozidrive screws. Once the screws are removed you will be able to take apart the handle.

It's a good idea to take note of how far the spindle sticks out from the base of the handle after you take it off it. This will allow you to measure the length of the spindle to determine an alternative handle. Simply measure the length the square peg sticks out of the bottom of handle.

This is particularly crucial for inline uPVC window handles since they are always straight and can only open left or right, and they won't operate in the middle. It's a good idea if you're not sure of the kind of handle you have at your home to borrow a handle and check out how it works.

Another excellent method to figure out what handed the uPVC window handle is is to simply look at how the handle moves when it is operating. Handed handles will turn either clockwise or anti-clockwise. If you're not sure it's possible to have someone else open the window using the handle, and figure out how it operates in this way.

Take a measurement of the spindle

It isn't easy to select the correct replacement handle for your window as there aren't all handles that have the same dimensions. The spindle is what controls the locking mechanism inside the window. It is crucial that when fitting a new handle, you measure the length of the spindle precisely to ensure it fits. There are a variety of uPVC handles that operate in various ways. It is essential to identify the type you have, and what locking mechanism you have.

Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox that is within the window frame. When you turn the handle this turns the lock within the gearbox and uPVC Replacement Window Handles opens the window. They are typically utilized on uPVC casement windows. They can be locked using keys to provide extra security.

Cockspur handles have an "nose" that closes over the striker block in a wedge shape on the frame. They are usually found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. It can be more difficult to replace these handles because they are less common than the handles made of espagnolette.

If you have an open tilt and turn uPVC window then you will need to get a special kind of uPVC replacement handle that comes with an entirely different locking mechanism. This will be able to tilt the window open but also rotate it inwards and outwards to open it fully. You must make sure that the handle you pick has a spindle size of at least 55mm or it won't be able to reach into the frame of the window.

You can follow the same procedure to take off and replace this kind of uPVC handle, however you must be careful when unscrewing the old one. It is possible to open the window more than usual to access both screws that secure it to the frame. Once you have put in your new uPVC handles and verified that they are in the right position then tighten the screws and check to make sure the lock is working correctly.

Fit the new handle

Once you have the right handle replacement it can be screwed into the right place. It will require a screwdriver, and an electric one may be easier. When screwing in place it is important not to over tighten the screws, as this can cause the handle to crack or warp.

Another important step to take when installing the new handle is to install the spindle. It is the part that runs through the handle and operates the locking mechanism within the window. It is essential that the part is fitted correctly to allow the window to open and shut securely.

There are a variety of types of uPVC handles. These include:

Espagnolette Handles - these are handles that are inline and can be used on tilt and turn windows to open the window replacement near me.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved design that can be useful for hard-to-reach windows.

Tilt and turn handles These are used to control the opening and closing mechanisms for tilt and move windows.

The majority of uPVC window frames come with these. They are often called 'Bay Windows in the UK.

It can be very frustrating if your uPVC handle breaks. There is no need to change the entire uPVC windows due to a broken window handle. There are a number of easy steps that can be taken to repair and replace a damaged uPVC window handle.

By identifying the kind of window you have, measuring the length of the spindle and buying a replacement handle you can easily repair your broken window handle. When working with windows and tools it is essential to put safety first. However this is a fairly simple job. It could be the difference between a safe and secure home or having a window that can be easily opened. If you have any concerns or would like to speak with a professional regarding replacing your window handle, contact Bridgewater Glass. We have a team that is knowledgeable and experienced to assist you with any issues.