How to Repair a uPVC Window Frame

uPVC windows are long-lasting and last for decades. Over time, they can be damaged.

This can impact the performance of the window. Fortunately, a lot of these issues can be fixed. This can help you save the cost of new windows and improve your home's comfort. The most frequently encountered issues are:

Cracks

uPVC, a durable material that is energy efficient and long-lasting, may crack over time. A damaged window is more than just an eyesore. It can let cold air into your home and can increase your electric bill because heat escapes from the crack. It's possible to fix a uPVC frame without spending a lot and it's possible to do it quite quickly.

The first step is determine the reason for the crack. This crack could result from an abrupt change in pressure when you open or shut the window. This type of crack is known as a 'pressure crack' and is usually found along the edges of the window. The crack must be repaired as soon as you can, as it could lead to water leakage or draughts.

Another common reason for cracks in your uPVC window is if the window frame or sill has become out of alignment. This could be due to moving furniture or settling in the home, and may even be the result of extreme weather conditions such as freezing temperatures. It's simple to address this issue by drilling some pilot holes, and then running a line of silicone across the gap. This will stop any moisture from getting into the window.

You should clean your uPVC windows regularly to keep them looking good and performing well. It is recommended to clean the frames with a white cloth that has been soaked in solvent or soapy water. Pay particular attention to the corners of the frame where dirt is likely to accumulate. You should also use a scraper Stanley knife to scrape off any beading that is stuck to the frame.

It's also an excellent idea to lubricate the hinges and rollers on your uPVC windows to ensure they don't begin to rattle when you open or close them. A excellent lubricant to use on plastic windows is WD-40, which is available at most hardware stores. It is recommended to clean off the WD-40 afterward, since it can stain your uPVC windows.

Draughts

Draughts are one of the most common issues that people face. These cracks in the window let cold air in, resulting in higher heating costs and a loss of comfort. Upvc windows typically have efficient seals against drafts, but with time, they can be damaged or deteriorated. You can easily fix a gap by using self-adhesive seals or by replacing your window.

It's important to maintain uPVC windows clean and maintained to ensure they last as long as is possible. To get rid of dirt, wipe them clean with a soaked soft cloth. Use an unclean, white cloth to clean the window frames. Avoid using a cloth containing dyes. They can stain them. Also, ensure that you don't clean the uPVC windows in direct sunlight, or they'll be left with streaky finishes.

You can also lubricate the hinges of a uPVC window if they're stiff or moving slowly to ensure that they are not misaligned. This will help keep the window open and close easily and avoid any drafts. You can purchase lubricants at DIY stores, like B&Q or online. However, be careful not to over-lubricate as this could cause the hinges to loosen and weakened over time.

Another reason for a draughty window could be that the window isn't aligned with the frame properly. This could be due to the window being poorly installed or due to natural movement in time. You can check if this is the case by opening and closing the window, and Window Repair observing any gaps in the corners. If there are any gaps, it's recommended to have the window replaced as soon as possible to prevent any further damage.

There are many reasons why uPVC is so popular with homeowners and businesses. They are affordable, safe and offer excellent insulation properties. They can increase the value of your home and are an excellent investment. However, uPVC windows can still be subject to damage, so it's essential to know how to fix them.

Broken or loose hinges

The most common cause for window problems with Upvc is the loose or broken hinges. The hinges can be repaired to fix the issue. You will then be capable of opening and closing your window normally again. This is a cheap simple, quick, and easy repair that will save you money on replacement windows.

Our windows made of Upvc are fitted with traditional friction hinges. They are usually used for side-hung windows however, they can also be used on top-hung windows. They are available in either a 13mm or 17mm stack and come in a pair. They are usually replaced when there are gaps around the sash, or draughts felt in the vicinity of the hinge, or if the sash is difficult to open.

It is important to read the instructions and follow the opening direction when installing a new upvc hinge. This is shown by an illustration of an arrow on the hinge. The arrow should be pointed towards the direction of the opening for the window to work properly. If you aren't sure what kind of hinge to order please contact us and we'll be happy to advise.

Lubricating your window hinges on a regular basis is essential. It will let the sash to open and close without difficulty and prevent warping or cracking of windows made of upvc. Use a light engineering lubricant containing corrosion inhibitors to grease your upvc windows hinges. This should be done at minimum twice a year.

This is a great method to maintain and keep your window in good repair. It is also crucial to make sure that the hinges aren't loose or broken. A few small adjustments to the screws will be made to fix this issue and you will not have any further problems with your window made of upvc.