Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism broken? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

You'll lose energy if your double-glazed doors don't function properly. This increases the risk of burglary. Owen the Locksmith can repair your door lock at an affordable price.

Snapped Key

It can be quite frustrating when a key gets stuck inside a lock. It could also be a security risk since the door may not be locked and could leave you vulnerable to intruders. Fortunately, there are simple fixes you can try to resolve the issue and get your door functioning correctly.

First, remember to stay calm. If you panic you could end up pushing the broken key further into the lock.

Spray WD-40, or another penetrating lubricant, into the lock. This will allow the broken piece come out more easily. You can also employ a screwdriver in order to break up any pieces stuck that might be hindering the flow. If you happen to have a little bit of the key hanging out, you can use a paperclip or some other metal object that is thin to grab it and remove it. Both of these methods work, but be cautious not to push the broken piece of the key further into the keyway.

Some paperclips have grooved edges that could be used as a hook extractor and some jigsaw blades are also suitable for this use. If you don't have any of these available, you can use needle-nose pliers that bend to create a hook. Also, a pair tweezers can be used to grip and remove the remaining part of the broken key.

If you cannot remove the broken key piece, use a lock deicer. This is usually found in most hardware stores, and it is used to freeze any moisture or ice that might be in the lock.

If none of these tricks are working then it's probably time to call in locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and Double Glazing Repair mechanisms that have snapped keys as well as broken handles. They can also alter the double glazing door mechanisms so that they are easier to use. Book a double glazing repair with us online or give us a phone call to discuss your needs.

Broken Cylinder

A damaged cylinder can pose an immediate security risk. A professional locksmith is able to fix the cylinder. To fix the cylinder, locksmiths must tap it. They can do this with the hammer or any other tools, but the most effective way is to make use of a long match or a piece of wire. The match or wire's end close to the keyway. The locksmith can strike the lock to crack it open. This is much better than using a heavy hammer that could damage the lock.

The most common cause of cracks in the cylinder head is overheating. This can happen when the cylinder head and block are made of various metals, such as cast-iron or aluminum. When various metals heat up and cool down at different rates, it can create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Another possible cause for cylinder cracks is corrosion. If the head and block of the cylinder are not maintained properly they could rust or corrode, which can cause them to expand more than anticipated. As time passes, this may cause cracks.

If your uPVC door or window lock is brittle or requires an enormous amount of pressure to turn, it can be the result of several things. This can result from a defective locking mechanism, or misalignment as well as a worn-out handle.

Fortunately, this is an easy and cost-effective fix for the majority of homeowners of double glazing. A professional locksmith will usually be able to resolve this problem within an hour after arriving at your residence. They can fix the locking mechanisms, or change the window handles and replace the gearboxes, based on the specific requirements of your home. A professional locksmith will always be able advise you on the most cost-effective solution for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders which offer an additional layer of protection against burglars. It's a small price to pay for the peace-of-mind that comes from knowing that your uPVC door is secured.

Broken Handle

Window handle locks have intricate mechanisms that become less effective with age and use, so it's not a surprise that they sometimes break. It can be difficult to determine the cause of the problem and then fix it properly.

If the issue is related to the locking mechanism inside or the latch, fixing the broken handle will increase your uPVC double glazing door's security and allow you stop drafts. When you aren't doing it right, replacing or repairing your handle can be expensive and can cause damage to the door's frame and lock It is therefore worth taking the time to do it correctly.

Screwdriver: With the window open remove the screw that holds the handle. The screw should be on the inside of the backplate. It is typically concealed by a screw cap for aesthetic purposes. You should not lose any internal components of the handle such as the plates and levers on either side. Ideally, keep these in the same order so that you can re-install them in the event of a need.

Then, using an additional screwdriver, loosen the screw that connects the handle to the spindle on the back. Once the screw is loose, you should be in a position to pull the handle away and pull out the broken spindle. Replace this with a new one, making sure it's the same length as the old one (you will typically find them online or in hardware stores) and screw it securely in the right place. Be careful not to overtighten as this could cause damage to the handle or the window replacement near me frame.

Close the handle and test it. It should operate smoothly, and you will be able to open your windows once again.

Don't forget to double-check that your uPVC window is shut correctly when you're working with the handle. If they don't close correctly, you could encounter draughts or damp in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure that they shut correctly.

Broken Spindle

It is often the case that the spindle inside the handle breaks, rather than the handle itself. This is most common in uPVC tilt and turn windows. These types of windows require a handle that acts as a locking mechanism within the window frame. The handle is attached a central rod that activates a series of mushroom-shaped locking cams that secure into the frame of the window keep. If the dead latch mechanism does not open when the handle is turned it is possible that the spindle is broken This can be a very frustrating issue.

Luckily, there are steps that can be taken to fix this problem. A reputable locksmith can swiftly and efficiently solve the issue. A reputable locksmith will be able to disassemble the handle of the window by using a tool that removes the wheel part where the spindle is located. This can be done without damage to the handle or window frame.

Once the wheel has been removed the technician can then examine the spindle to determine what has caused it to break. This involves disassembling the spindle and inspecting each component part, noting any wear or damage. The process is performed in a clean environment by skilled technicians.

The next step is to clean the damaged spindle, this assists in removing any dirt or other debris that could be hindering its normal functioning. After that the spindle is cleaned, it could be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is the same size to the original. Then, he will make holes in the same way into both pieces. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle can't be repaired it may require replacement completely. Home centres sell generic substitutes however if your window design is unique, you will need to contact an expert in woodworking or cabinet making who can recreate the exact component. Once the spindle has been installed, it can be fixed to the handle. Place the screw holes on the handle with the existing screws in the frame. Once the new handle is seated you will be ready to operate your uPVC window.