Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If you have double glazed window repairs near me-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the distance between the door and the window is significant, you may want to use a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. Over time, they can develop a number of problems that include sliding. A sagging window can cause problems with light, draughts, and even security. It's important to take action immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll need to open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fitting. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in position.

If you can't reposition the hinges, you might need to replace the seal. Over time, Window Repair rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles could also loosen. This is often caused by screws that have become undone over time, but it can also be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. The first step is to close the window and perform a test fit. The corners of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to act if you awake each day to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

It is a fairly easy fix that can be done by any competent DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze It could be hinges at fault. They can be repaired by any skilled DIYer and can usually be done within a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It's easy to change a window hinge however it is easier if someone helps hold the frame.

Make sure that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain manner or because of inadequate installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to provide assistance.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the Window Repair operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear can become misaligned, this will cause a gap to form between the sash and the frame. If they are beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge side of the window, may also become misaligned, again it is feasible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be put on top of your windowsill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. If you have any problems with your upvc window you should consult a professional immediately.