Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum or timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the old frame very easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this situation you'll need to find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

If you are going to attempt to remove the window panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they are susceptible to a range of issues, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It's crucial to act immediately if you notice your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you're satisfied with the fit of the window repairs near me, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and draught-proof.

UPVC handles can also loosen. Often it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform an initial test fit. The corner joints of the sash must align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and that the sill pan is angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is with the seal than the frame. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with ease, it may be hinges at the fault. They can be repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy process, but it's simpler with someone else to help you hold the frame in place.

Make sure that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges can also become unbalanced due to wear, causing gaps where the sash and frame meet. If they are beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge side of the window and can also become misaligned, again it may be possible to just give them a clean but in some cases it might be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and UPVC Window Repairs reduce draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually wear out and it may be more cost-effective to simply replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.