Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. However, if you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this instance, you will need to find some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards fall onto the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you may think about an alarm door that comes with an integrated window repair, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sliding. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to access the frame. After that, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and UPVC Window Repairs Near Me test it for fit. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close the window and then perform an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how serious the issue is, the old caulking might need to be removed. When it is time to uPVC repair, you must avoid over-caulking. This will only make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens with a breeze. They can be easily repaired by any skilled DIYer and can be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's easy to change the hinges on a window however it is easier if someone helps hold the frame.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you suggestions.

It is also important to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. This should be done at least every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc window repairs near me (read article) windows can be caused by a variety of various factors. The hinges may also become misaligned due to wear, which can cause a gap where the sash and frame meet. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time, and let air escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on the top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually get worn out and it is more cost-effective to simply replace them than to repair them. If you have any problems with your upvc window you should consult an expert immediately.