Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. However, if you have double pane windows that are secured by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance you'll need to locate some plastic spacers that will assist the new pane to fit perfectly into the window frame.

If you plan to attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall onto the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the distance between the door and the window is large, you might need to consider an alarm system that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they can suffer from a variety of problems including sliding. A sagging uPVC windows can cause problems with light, Upvc window repairs draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window replacement watertight and draughtproof.

uPVC handles can also become loose. The majority of the time, Upvc Window Repairs this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is crucial to take action if awake each day to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with an ease. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by poor installation at the factory. Sending us photos via our website will often resolve the problem. We are more than happy to provide assistance.

It is also important to grease the hinges regularly. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges may also become unbalanced due to wear, which can cause a gap where the sash meets frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to have them realigned or replaced. The interlock may also become unbalanced. This happens on the hinge's side and could require to be cleaned. In certain instances it is possible to replace the hinges.

These seals can wear down or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are typically made of fabric filled with some type of filler. They can be placed on top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and there may come a point where it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it's best to seek professional assistance as soon as possible.