Why You Should Trust Your Double Glazing Repairs to Local Experts

It's not possible to replace double glazing by yourself, however a professional glass installer can make the task easy and secure. It's also worth checking with the company you purchased it from if it is still under warranty.

Misted windows can be drilled to release condensation, but this is only a temporary fix. Double glazing that has been blown has to be replaced to restore thermal efficiency.

Broken window panes

When a window pane breaks, it creates an obvious gap in the double glazing that can cause draughts and moisture. These aren't only inconvenient however, they can also harm your property and your health. In fact, damp environments can lead to damaged frames and other structural issues that can be costly to fix.

However, a broken pane is usually a simple fix provided you know how to do it correctly. First, you must take the necessary precautions to avoid injury, for example, wearing gloves and eye protection. Then, you can remove the glass shards that were left. Use a utility blade to cut through any glazing points made of metal and glazing putty once you have removed all the glass shards. After the glass is removed from the frame, take it off it carefully.

After you've cleaned and sanded the surface to get rid of any paint or gunk, it's time to prepare the area to accommodate the glass. Make sure to take measurements of the opening from side to side and top to bottom. Then subtract 1/8 inch from both measurements to accommodate any expansion or contraction of the frame over the years. This will ensure the glass is correctly installed.

Next, apply a cord of glaziers compound to the outside edge of the glass-frame joint. Smooth it out using a putty blade, matching the color of the frame. When the compound is dry, you can paint the new pane in the same colour as the rest of your window.

To stop the crack from spreading, create a small arc using your utility knife, just beyond the area that is damaged. This will curtail the crack and prevent it from spreading, saving your window repairs without the necessity of replacing it.

Although you might be tempted to do it yourself but this is extremely difficult without the right tools. It's safer and more convenient to get in touch with a business that specialises in repairs to local double glazing. This will help you save time and money, as well as make sure that your double-glazing is repaired to the highest quality.

Broken seals

A damaged seal can cause windows to lose their insulation properties, resulting in drafts and increased energy bills. It also allows humidity and moisture to enter the space between your window panes, causing condensation and fogging. Foggy windows can be a hassle to live with and the issue will only worsen over time when it is not taken care of.

There are many ways to avoid window seal breakages such as having your windows professionally installed and glaziers avoiding washing your windows with power. Even if your windows appear good, you should get the seals replaced as soon as possible if you notice any signs that the seal is broken like condensation on the glass or an increase in your energy bills.

The window seals are made of flexible materials that can be damaged as time passes. Older windows are more likely to experience this problem, as are windows that have been exposed to excessive sunlight. Window seals can also fail due to problems with installation, such as gaps and uneven frames.

While it is possible to repair a broken window seal on your own but the process is a bit complicated and can damage other components of the windows, for instance the argon gas contained within the windows. It is recommended to contact a professional to inspect your windows and repair any worn or damaged seals.

Once the window seal is replaced, your double glazing will perform as it should, protecting your home from unintentional heat loss and cold air infiltration. This will save you money on heating and cooling costs while ensuring your home is cozy.

In most cases, fixing a broken window seal requires removing the window from its sash and then removing the sealant that was previously used. Once the window is clean and is ready to be reinstalled, it will be refilled with argon gas and sealed once more. It is possible to do the work yourself, but it is recommended to consult a professional to ensure it is done correctly and safely.

Broken door handles

The handle for your home's front door is a vital element of your security. It allows you to open the door, and also connects to a latch that is set into a slot in the frame of the door to keep the door closed. If the handle of the door feels loose, it can cause problems opening the door, and it could be a sign of issues with your locking mechanism too.

It's easy to fix a handle that is loose on a door. In the majority of cases, you can tighten the screw that holds it in place. If the problem is more severe it may be necessary to replace the handle.

You will need to first wedge the door open using an obstruction or glaziers wedge to ensure that it doesn't close when you are working on the knob or handle. This will prevent it from damaging the paint and will also help you gain access to all parts of the knob or handle without worrying about the latch being engaged.

Next, you'll want to take off the cover plate that is on the door handle. It could appear to be a round or rectangular piece of plastic designed to hide the screws to make them appear cleaner. Some may have a tiny slot or detent that you can use a flathead screwdriver press down on to open it. Then, you'll have to take off the handle's base and remove the screws that hold it in the position.

The cover plate hides the majority of the screws holding your door handle or knob in place. When you take off the cover plate, you'll be able to easily see all of the screws and tighten as necessary. Don't over-tighten the screws as it could damage the knob or handle. When all screws are tight you can put the base back on and place the handle or knob on top to line up with the screw holes (if you have visible ones) or the detent hole. Once you're finished, test out the handle to ensure it's working as intended.

Scratches and chips

Sometimes, even the most well-maintained double glazing can be damaged. Cracks chips, dents, and cracks are caused by balls that are stray or a sudden wind gust. These damages can have a negative effect on the performance of your doors and windows which will require them to be replaced. It is crucial to recognize the signs of damage and to contact your installer as soon as you can. It is helpful if you provide the details of the problem along with photos if needed.

It may be possible to repair scratches or chips without a lot of effort, based on their severity. If the scratch is large enough that you can feel it with your fingernail, it is recommended to contact a glazier to take it off. They will be able employ glass polish to eliminate it. They will also be able to provide you with some tips for maintaining your windows and doors in good condition.

Be alert for indications of a gas leak in the cavity between your windowpanes. If you see condensation between the window panes, it could mean that the inert gases have evaporated and warm, indoor air is now circulating through your home. It is essential to contact your installer immediately if you spot this issue, since it could be covered by your warranty.

If your double-glazed windows are covered by an assurance, you can claim any repair costs. If not, you might want to think about switching to a different installer that can be relied upon to deliver high-quality windows and excellent customer service. You can look up online reviews, go through the BBB and seek references from previous customers to ensure you select a company with a strong reputation for professionalism and quality. You should also inquire about certifications from major manufacturers and the Fenestration and Glazing Industry Alliance. This will allow you to avoid companies who do not have the authorization to install double-glazed windows.