Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace, uPVC window repairs and they generally fit into frames that were previously in use very easily. However If you have double pane windows that are secured by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall on the fabric instead of landing on the floor where they could be trampled on and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is large, you might want to use a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. Often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes have no debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to note that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be corrected by an uPVC window repair specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with ease it could be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy process but it can be easier to do with someone else to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused by opening the window repairs near me incorrectly or a faulty installation at the factory. This can often be resolved by sending us a photograph on our website. We will be happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. The interlock, which is located on the hinge side of the window and can be misaligned. Again, it's possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The seals may wear out or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security for your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.