Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they typically fit into frames of the past easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers to help the new pane to fit properly into the window frame.

If you plan attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your home until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap is particularly large, you might want to consider using the security door repair with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. However, over time they can suffer from a variety of problems including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window repairs is beginning to sag it's important to act quickly to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in the right place.

If you aren't able to move the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause them to lose tightness. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is crucial to act if you get up each morning to find a smoky wall and wet floors. Water leaks from windows can not only cause degrading of the structure of your home but also hinder your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a relatively easy fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and that the sill pan has been angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and window repairs can quickly spread throughout the home.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze it could be the hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. Changing a window hinge is essentially a very simple process but it can be easier to do when you have a person to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to give advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also decreases the risk of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop between the sash and the frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it is possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

The second most frequent reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repair windows made of upvc will provide excellent security and insulation for your home. It is crucial to recognize that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.