Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism not working properly? Perhaps the window or door handles aren't able to connect properly or are hard to use.

It's important that your double glazed doors operate smoothly, otherwise you'll be wasting energy and leewhan.com increase the likelihood of burglary. Owen the Locksmith can repair your door lock at an affordable price.

Snapped Key

When a key snaps off within a lock, it can be extremely difficult. It can also be a security problem because it could make you vulnerable to an intruder if the door does not lock. There are a couple of quick fixes you can try to resolve the issue and get your door working again.

The first step is to remain calm. If you panic you could end up pushing the damaged key further into the lock.

Next spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also make use of a screwdriver to break up any stuck pieces that might be hindering the flow. If you have a part of the key that is stuck, grab it with a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the broken key piece further into the keyway.

Some paperclips have grooved edges, which can work in a pinch as hook extractors and some jigsaw blades are also suitable for this use. If you don't happen to have any of these items then you can bend a hook with needle-nosed pliers. Also, a pair tweezers is a good way to grasp and pull out the last part of the broken key.

If you are unable to get the broken piece of the key out, try using a lock de-icer. It is available in most hardware stores and works by freezing any moisture that may be present in the lock.

If none of these solutions work, it may be time to contact a locksmith. The experts at Fitlocks can quickly fix issues such as broken handles and snapped keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. Book a double glazing repair through us online, or give us a phone call to discuss your needs.

Broken Cylinder

A broken cylinder can be an extremely risky security issue. A locksmith professional can repair the cylinder. To fix the cylinder a locksmith will need to tap it. They can do this using an hammer or another tools, but the most effective method is to employ an extended match or piece of wire. Then, put the match's end or wire in the keyway. The locksmith can hit the lock to break it open. This is more secure than using a hammer, which can damage the lock.

Overheating is the most common cause of cylinder heads cracking. This can occur when the block and the cylinder head are made of various metals such as cast-iron and aluminium. Different metals will heat up and cool down at different rates. This could cause localized hotspots to expand faster than the rest.

Corrosion is another possible cause of cylinder fractures. If the cylinder head and cylinder block are not properly maintained, this can result in corrosion or rust, which may cause them to expand at more than they should. In time, this could also lead to cracks.

If your uPVC window or door lock is stiff or requires an enormous amount of pressure to turn, this can be the result of several things. This problem can be caused by a faulty locking mechanism or misalignment or a worn-out handle.

This is a straightforward and inexpensive fix that most double glazing owners can do. A professional locksmith will usually fix this problem within one hour of arriving at the home. Based on your requirements they will be able to replace the locking mechanism, replace the window handles, and change the gearboxes. A professional locksmith will always be able advise you on the most cost-effective solution for your home. They can also suggest upgrades to the highest-security 3 Star TS007 euro cylinders that will add an extra layer of security against burglars. This is a small cost to pay for the security that comes from knowing that your uPVC doors are safe.

Broken Handle

Window handle locks have complex mechanisms that wear out with time and usage, so it's no surprise that they can break. If yours fails it may be difficult to identify the cause of the issue and make sure you fix it properly.

If the issue is with the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security as well as help you to stop draughts. Incorrectly repairing or replacing your handle can be very expensive and could cause damage to the door's frame and lock It is therefore worth taking some time to make sure you do it right.

With the window in the open position then loosen the screw holding the handle using the screwdriver. The screw should be on the inside of the backplate. It is typically hidden by a screw cap for aesthetic reasons. Be careful not to lose any of the internal parts within the handle, such as the plates or levers that are on either side of the spindle. Keep them in the same order so that it is easier to replace them if needed.

Then, with a second screwdriver take the screw off that holds the handle to the spindle in the back. Once the screw is loose, take the handle off and take the broken spindle out. Replace it with a new spindle, making sure it's the same length (you can purchase them online or in hardware stores). Securely screw it into the correct position. Do not overtighten the screw because this could cause damage to the handle and window frame.

Check that the new handle is correctly installed Close the window and test the handle. The hope is that it will function smoothly and you'll be able unlock your window.

Don't forget to double-check that your uPVC window replacement is shut properly when you're working with the handle. If they aren't closing properly, you may experience damp or draughts in your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure that they shut properly.

Broken Spindle

It is usually the case that the spindle inside the handle breaks, rather than the handle itself. This is most frequent in uPVC tilt and turn windows. These types of windows require a handle which operates a locking mechanism in the window frame. The handle is connected to a centre rod that triggers a set of cams that look like mushrooms, they secure the frame of the window. If the dead latch mechanism does not open when the handle has been turned, it is most likely the spindle is broken. This could be a frustrating issue.

Luckily there are steps that can be taken to remedy this situation. A good locksmith can quickly and efficiently fix this problem. A reputable locksmith can disassemble the window replacement's handle using a tool that removes the wheel from the area in which the spindle is. This can be done with no damage to the handle or the window frame.

After removing the wheel the technician can examine the spindle and determine the reason for its break. This involves disassembling the spindle, and then examining each component, noting any damage or excessive wear. This procedure is usually performed in a clean, well-lit room by skilled technicians.

Then, clean the damaged spindle. This will help remove any dirt or debris which might be preventing it from operating normally. The spindle can be replaced or repaired. If the technician is replacing the spindle, it is possible to use a dowel that is similar in size to the original. Then, he will make holes in the same way into both pieces. This will ensure that the spindle fits perfectly with the handle.

If the spindle that is damaged is beyond repair, utahsyardsale.com it could be necessary to replace it entirely. Home centres sell generic substitutes however if your window design is unique then you'll have to speak with an expert in woodworking or cabinet making who can replicate the exact piece. Once the spindle has been installed, it can be connected to the handle. Place the screw holes on the handle with the screws that are already in the frame. Once the new handle is installed, you are now ready to operate your uPVC window.