Choosing uPVC Replacement window handle Window Handles

Almost all customers agree that these windows handles made of upvc are easy to fit and feel like good quality. It is important to be aware that the handle you select for your window must be suitable for the window.

The key factor is the step height that is the distance from the handle's nose to the base or frame. Other factors to consider are lockable styles and mechanisms.

Replacement parts

There is a broad selection of replacement window handles made of upvc available for purchase. They come in many different styles and colors so there's sure to be something to suit your existing windows. It's easy for you to buy something on impulse especially when the handle breaks. It is therefore advisable to check a few things before purchasing a replacement. The first thing to think about is what type of upvc handle you currently have and what the difference between types is. The table below shows the most commonly used handles to help you identify the one that will fit your windows made of upvc.

Most double-glazed windows today have epag handles. They are typically attached to the frame with two screws that screw in from both sides.

The spindle bar in the back can be different sizes, and will determine if they're left-handed or right-handed. This is why it's essential to determine the handle size in order to make sure you're ordering the correct replacement.

Usually, replacement window handle they are fixed with two bolts much like the Espag handle but they have a lower projection from the frame which means that the handle will not penetrate your blinds. This is a great choice for those who want the handle to blend with your blinds and have upvc windows.

Cockspur handles resemble Espag handles, but they have a nose that closes over a wedge that rests on the frame of the window. This kind of handle can be found on a few older wooden and Upvc windows.

On casement windows the tilt and turn handles can be operated by either turning the handle or pressing on the top of window. The window is opened from the inside, allowing you to clean from outside without having to go out onto a ladder or walk over the garden fence. These are also a great option for those with limited mobility and enhance security and access to the home.

Tips and tips and

There are a number of different types of uPVC window handles, and lots of people will need to replace them at some moment. When this occurs, it's a good idea to be aware of a few tricks and tips that can make the process go as smoothly as possible.

The first step is check what type of handle you have at home. Depending on what the handle is attached to and which locking mechanism it utilizes it could be necessary to replace the entire handle and lock. If the roller cams and shoot bolts (espags) are jammed, or seizing up, you'll have to replace them, along with the handle.

Fortunately, the majority of uPVC handles follow industry standards and are alike. This makes replacing them a relatively easy process. First, take off the screws on the handles. These are usually pozidrive screws. Once they are removed, you can then take the handle apart.

It's a good idea to note how much the spindle extends from the base of your handle when you remove it. This will allow you to measure the length of the spindle to determine the replacement handle. Simply measure the amount that the square peg extends from the bottom of the handle.

This is particularly important for inline uPVC windows handles, as they are always straight and only open left or right. They won't work in the middle. It's a good idea if you're not certain of the type of handle you have at your home to borrow a handle and see how it functions.

Another great tip for working out what the handed of the uPVC window handle is is to look at how the handle rotates when operating. Handles can be turned clockwise or counter-clockwise. If you're not sure then you can always have someone else open the window with the handle, and work out how it operates in this way.

Find the spindle's measurement.

Choosing the correct replacement handle for your windows can be a bit difficult since not all handles are identical in size. The spindle is what is the mechanism that locks the window and it is essential that when you fit a new handle that you measure the spindle length accurately to ensure that it fits. There are a variety of types of uPVC window handles, and they operate in different ways so it is essential that you know which kind of handle you are using and the type of locking system you have.

The spindle of the espag handle extends out from the handle's rear and is attached to the lock gearbox in the window frame. When you turn the handle, this turns the lock inside the gearbox and opens the window. They are typically used on uPVC casement windows. They can be locked using keys to give extra security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They have a "nose", which closes over a wedge-shaped striker block. They are also simple and can be locked with keys. They can be a little more difficult to find replacements for because they aren't as well-known as the handles with a espagnolette.

If you have an open tilt and turn uPVC window replacement then you will require a specific kind of uPVC replacement handle with an entirely different locking mechanism. It can tilt the window open but also rotate it back and forth to open it fully. You must choose a handle with a spindle that is at least 55mm to be able to reach the window frame.

You can use the same method to take off and replace this kind of uPVC handle, but you must be careful when unscrewing the old one. It is possible to open the window more than usual to reach both screws that attach it to the frame. Once you have fitted your new uPVC handle and verified that it is in the correct position, then you can tighten the screws and test the lock to confirm that it works correctly.

Replace the handle with the new one.

Once you have the correct replacement handle it can be screwed into the right place. It will require a screwdriver and an electric one may be a lot easier. When screwing in place it is important not to over tighten the screws because this could cause the handle to crack or warp.

Another important step to take when installing the handle is to put in the spindle. This is the part that is inserted into the handle and operates the locking mechanism within the window. It is vital that it fits correctly as this will ensure the window is able to be closed and opened with confidence.

There are a variety of different kinds of uPVC window handles. These include:

Espagnolette Handles are inline handles which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curved design that can be useful for hard-to-reach windows.

Tilt and Turn Handles - These are used on tilt and turn windows to operate the opening and closing mechanisms.

The majority of uPVC window frames are fitted with these. They are often called 'Bay Windows in the UK.

It can be a hassle if your uPVC handle breaks. There is no need to change the entire uPVC window because of a damaged window handle. There are a few simple steps you can follow to fix or replace a damaged uPVC handle.

You can fix your broken window handle fast by identifying the type and determining the spindle. When working with tools and windows it is essential to consider safety first. But this is a fairly simple job. It can be the difference between having a secure and safe home or an insecure, easily opened window! If you have any questions or want to talk with a professional regarding replacing your window handle, contact Bridgewater Glass. We have a team that is knowledgeable and experienced to help you with any issue.