magnetic planar (this site) Speakers - Holographic 3D Imaging and Stunning Clarity

Using a thin tensioned diaphragm suspended between 2 arrays of magnets They vibrate to create sound waves. Planar magnetic speakers are known for their holographic 3D images and stunning clarity.

They are also ideal for a broad range of audio applications because of their low distortion, large horizontal and vertical dispersion and low costs.

Superior Sound Quality

Planar magnetic speakers are known for delivering clear, precise sound with minimal distortion. This is because they employ a flat diaphragm with an conductive trace pattern that reacts to a magnetic field from magnets located on one or both sides of the speaker. This causes the diaphragm to move, generating sound waves that are transmitted through the dipole radiation pattern. This makes the diaphragm move more evenly and produce a higher-quality sound compared to the typical cone or dome driver.

Planar magnetic drivers also have the benefit of a wide and uniform sound dispersion. This allows the sound to be heard from any place within the room. In addition, planar ribbon or dipole speakers have a natural and spacious soundstage that has very little resonance. This creates an immersive listening experience that brings music to life in a way that is hard to replicate with other kinds of speakers.

Because they have such a large surface area, planar magnetic speakers are also more durable than cone drivers, and can operate at higher volume levels without causing excessive vibrations or distortion. They also sound better than other types of speakers, which makes them an ideal choice for home theatre or HiFi applications.

Planar speakers are more expensive due to their complicated design. However, they offer better audio quality and are well worth the investment. Planar speakers also have lower impedance than other types of loudspeakers. This makes them more suitable to drive amplifiers.

These advantages make planar magnetic speakers an ideal for home and professional applications however, they are not as popular in IEMs, as they require more advanced engineering to incorporate into small form factors such as headphones and earbuds. Recently, however, there has been an increase in the number of IEMs available with planar magnetic technology. The Rinko by Seeaudio and the S12 and Z12 from LETSHOUER are two examples of IEMs that have been proven to offer a superior listening experience.

Lower Distortion

Low distortion is the most desired characteristic for many audiophiles. Distortion is created in the speaker by various elements, but perhaps the most popular cause of distortion is the voice coil inductance. When an alternating current is pumped through a conventional moving coil driver's voice coil the inductance of the voice coil produces magnetic fields that trigger a movement of the diaphragm. The resultant movement, or excursion is what causes the sound wave to be generated but it also generates unwanted resonances and harmonics that affect the audio quality of the speaker.

One of the major advantages of magnetic planar speakers is that they feature lower distortion than traditional dynamic drivers. This is because the "voice coil" is spread across an extensive surface instead of being squeezed into a narrow space within a massive chunk of metal. This means that a well-designed planar magnet speaker can handle far more power than traditional dynamic drivers without audible strain.

Planar magnetic speakers also reduce distortion by presenting a nearly perfect resistive load to an amplifier in the system. The voice coil is a thin, long wire that behaves as a resistor. This makes the amplifier easy to drive and will always sound the best planar headphones when connected to an electric planar speaker.

The high level of efficiency that magnetic planar speakers have implies that they produce little heat when playing music at loud volume. This is crucial as a large amount can damage the voice coil and reduce its lifespan.

However, this isn't to claim that all single-ended planar magnetic speakers are without distortion. Because of their proximity to the magnet spacing, magnetic forces can interact and pull each other to a significant degree, which can result in changes to the diaphragm's tension over time. This issue is exacerbated due to the close proximity between adjacent rows of magnets.

Better Heat Dissipation

In the last few years, a number of specialization HiFi audio headphones manufacturers have created amazing masterpieces using planar magnet technology. While many people consider the standard coiled dynamic driver the majority of headphones and speakers use to be superior, there are some remarkable advantages of using a planar magnet design.

One of the major advantages is that the "voice coil" is spread out over a much larger surface area than a conventional cone speaker that allows it to disperse heat efficiently and not get too hot. This makes the voice coil operate more efficiently and with less distortion and also enables an extremely light diaphragm that can be driven to extremely high excursion levels.

This allows the planar magnetic speaker to have exceptionally rapid transient response, meaning that sharp peaks and very small details can be reproduced very precisely even at very high SPLs. This also means that the sound is extremely clear and clear of distortion. It is not different from the original source material.

The impedance curve of the planar magnetic speaker is extremely flat, ranging from 4.2 Ohms for the bass to 3.3 in the treble. This makes it a simple load to drive amplifiers, and is similar to resistive loads used by electronics manufacturers to show their products' quality.

A ribbon/planar diaphragm that's extremely lightweight can move quickly and with little strain. This produces very clear and crisp sound with a wide bandwidth and excellent linearity.

The ribbon/planar design is also very quiet, which decreases distortion even further. Additionally, it is extremely stable across a range of temperatures, which enables the speaker to provide consistent sound quality for long periods of time and over a broad listening area.

While the benefits of a ribbon/planar speaker are numerous, it's important to remember that they are a specialized kind of loudspeaker that is not suitable for all applications or for all listeners. For instance, a planar or ribbon speaker with a large radiating panel requires an extremely large space to create a full-range sound with an sufficient SPL. Most of these speakers are only available as tweeters, or as upper mid/high range components in a two-way speaker system.

Higher Power Handling

Magnetic planar drivers provide amazing clarity and detail without the distortion that is common to traditional cone drivers. They can show subtle variations and reproduce complex sounds with precision. They also have a wide frequency response, which means they can produce a wider range of frequencies with greater accuracy.

Planar speakers create a directional sound field, which could be a drawback when you're listening in the same room as other people. It's also the reason they have such a wide high-quality sound and crystal clear imaging. The sound is like a laser beam, emanating directly from the speakers. It is heard when you are off-axis.

The flat diaphragm in combination with the acoustic waves front provides them with a greater sense of depth and space than cone speakers. They also tend to have an acoustic wavefront that is less noisy which makes them less distracting in noisy environments. Planar magnetic drivers are preferred by many audiophiles for their natural sound quality.

However, magnetic planar there are some limitations to the technology. Planar drivers are more difficult to make than conventional cone drivers, and they are quite heavy, which makes difficult to install in certain situations. They also require a greater power output to drive them, which may limit their maximum output.

Wisdom Audio is the leader in the development and application of PMD technology. Its products continue to push forward the limits of this revolutionary technology. Its new patented materials can withstand temperatures far higher than PET, which is commonly used in the majority of planar driver. The unique design also reduces the effects of diffraction which can occur when sound waves travel through narrow gaps and curves.

The headphones and speakers made by this company are renowned for their incredibly detailed and clear sound, devoid of distortion. They are also more responsive than cone drivers, which could improve their bass response. They're also capable of reproducing high frequencies with amazing accuracy, and they can produce powerful, deep bass.