Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized item from theft. It's discreet and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be altered up to 20 times. This then authorizes the start-up of your vehicle.

Simple change of PIN code

Many homeowners are upgrading their security because of the rise in vehicle theft. There are many different types of security gadgets that are sold aftermarket that range from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. A tracking system can aid in finding your vehicle if it's stolen however it cannot stop the crime. Immobilisers, on the contrary are exactly what they say on the tin: they disable your car's motor so that it isn't able to be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your vehicle.

The ghost device utilizes the buttons on your car to generate a unique sequence that must be entered in order for the engine to begin. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This is especially beneficial if you have to give your car away for valet parking or maintenance, as the immobiliser will still be active and not deactivated.

The Ghost is a truly unique and innovative device which works in conjunction with buttons of your car rather than being a standalone device. It's not just an effective deterrent for vehicle theft and vandalism, but it can be used to secure any future vehicles you own. This makes it a better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security device that protects your vehicle from key cloning, hacking & ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be plugged into the vehicle without the need for extra wiring and has been thoroughly tested to ensure it works with all vehicles. It also is resistant to jamming devices, which is an approach used frequently by thieves to get around the immobilisers in place.

The benefit of using CAN data is that it runs silently compared to traditional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies and cannot be detected by traditional diagnostic tools. The Autowatch ghost does not produce LED indications and uses the buttons on your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. The sequence can be extended 20 presses for extra security. The iPhone app only allows one connection, and comes with the Ghost's unique pairing code. the Ghost. All communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU to bypass the immobiliser. The engine will only run when a valid PIN code has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) to allow you to hand your car over to a valet service to be serviced without needing to enter a pin code.

Every vehicle is tested

The autowatch ghost immobiliser fitting Ghost is the first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device detects electronic signals that block your car's system from performing its normal initialization process until you enter the passcode you have created. The system can be activated or deactivated by using your smartphone's app without the need for wires.

Standard factory immobilisers in vehicles function by using an electronic transponder in the key that transmits an electronic signal to the ECU. The car will start if the correct code is transmitted. However, if the transponder of a different vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle start and be stolen. The Ghost immobiliser problems immobiliser has been developed by an South African company at the forefront of vehicle security systems technology. It shields you from hacking or key cloning and even key theft. Only by physically towing your vehicle away could a thief take it away and not be able to drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to generate an individual, changeable PIN code sequence that must be entered prior to you can drive. This is performed without the need for extra hardware such as keys-fobs, and can be up to 20 presses long. It is also inaccessible to diagnostics equipment and does not transmit radio frequency signals, which means thieves are unable to use sophisticated RF scanning or code grabbing technology to detect that the security system has been installed.

Ghost is more difficult to remove than car alarms, which require disarming with several buttons. This makes it a great addition to an GPS tracking device that can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You don't have to look very far on social media for stories or ghost Immobiliser Problems videos about cars that were stolen using the most advanced technology tools. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle with the original keys.

The Ghost immobiliser has been designed to combat this and offer an additional layer of security in order to protect your vehicle from being targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN has to be entered together with your original key fob to stop the vehicle from getting started. The unique override pin can be found on a black plastic card that you receive following your installation. It is easy to remember because there are no LED indicators.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, therefore it can't be recognized by criminals using diagnostic software that can identify the security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

In contrast to other security systems which rely on a relay in the engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems, ghost immobiliser problems however this must be specified before installing the device. They are also fully service/valet-mode compatible and are a great alternative to a tracker when having your car in for an electrical fault at the dealers.

Service/Valet mode

In recent times, there has been a increase in the number of vehicles that are stolen without owners' keys. It is easier than ever before to steal your pride and joy with the availability of key cloning tools & door lock picks. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys have been cloned or your vehicle has been hijacked.

It connects directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, because it does not utilize radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also protects against adding an additional key or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, centre console and door panels. A unique and changeable PIN code sequence up to 20 digits must be entered before you can start your vehicle.

This is the first aftermarket CAN-bus immobiliser that is being designed. It will prevent your vehicle from being driven or even started when you don't enter a PIN code first. If you are driving away with the device in motion, an indicator will appear on your dashboard that will flash continuously for around 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate as normal. If you do not enter your PIN at this time the indication will continue to flash and will require another PIN code for every attempt to start your vehicle.