Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However If windows with double panes are anchored by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor and could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is substantial, you may want to use an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they are susceptible to a range of problems including sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It's crucial to act when you realize that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can access the frame. After that, using an screwdriver, Window repairs remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles could also loosen. Most often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. You'll first need to close the window and then perform a test fitting. The corners of the sash must be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your upvc window repair window is difficult to open, or if it opens in an ease. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical component hinges will wear out over time. It's easy to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. First, the hinges due to wear and tear may become displaced, which causes a gap to form where the sash meets the frame. If they are damaged beyond repair, it might be required to realign them. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it may be feasible to give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and Window repairs repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually wear out and it may be cheaper to replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as possible.