Window Repairs

Window upvc repairs can save homeowners money and help keep their homes warm. In the event of major damage, such as broken glass or a cracked frame, a window replacement could be required.

Many other problems are fixable to extend the longevity of windows. The most frequent issues are:

Broken or cracked panes

It's a rock that's been that was tossed by your lawnmowers or a tree's branch blown by high winds, damaged window glass isn't just ugly, but it can also result in higher electric bills since the broken pieces let cold air into your home. It's relatively easy to repair windows with broken panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may need to use an utility knife to remove old glazing compound or putty around the frame's edges. Next, use a soft paper towel or cloth to clean the surface of both the glass and wood of the frame.

Once the frame is clean then apply a waterproof silicone caulking around the perimeter of the frame. This will prevent water from getting into the frame through the cracks and result in further damage.

A serious crack in double-paned glass can affect the gas between the panes, which can make your windows less insulative. If the crack is significant enough to compromise the integrity of the glass or the glass has an inner pane completely missing, it's the time to call a professional.

Thermal stress cracks may also occur when there is an extreme temperature difference inside and outside your home. The glass is then able to expand and shrink. If the cracks are on two sides of a window it is best to replace it rather than try to repair it.

Clear tape can be used to close cracks in windows that are not yet ready for replacement. It will also keep out bugs and cold wind. You can cut an area of nylon stocking or tarp large enough to cover the crack, window replacement and stick it to the wall using duct tape. This isn't an end-to-end fix, but it will keep insects out and cold air away from your home. If your windows are old and window replacement you're beginning to notice cracks in the glass It's a good idea to check with the local upvc window repairs company about whether replacing the entire window could be a better solution for you.

Rotten Wood

Wood rot is one of the most common problems with windows. It can damage a home's appearance and create a security danger. It is, however, possible to repair wood that has rot. You will first need to address the cause of the wood rot. Examine for leaks in the roof and other places that water may get into the wood.

The next step is to take out the rotten components of the window frame. This can be done using a claw hammer, chisel, or rasp. Once the rotten areas have been removed then you must replace them with new wood. Pre-treated wood is suggested for this project since it is resistant to the onset of rot. If you are not able to replace the wood damaged by rot then you can use wood hardener or filler to strengthen the damaged area. This kind of product will be found in a lot of hardware stores. To achieve the best results, make sure you follow the instructions on the product label.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. This can be done by applying a water-resistant wood sealant. Sikkens for instance is a fantastic product to apply.

Use a two-part epoxy in order to safeguard the wood from further damage. This product is easy to apply and provides an excellent finish. It is crucial to follow the instructions on the label. When the epoxy filler is dry you can sand the surface of the wooden. It is recommended to begin with a rough piece of sandpaper, and then progress to a smoother grade.

You don't want to expose your rotted part to more moisture. Therefore, it is a good idea to cover the area that has been repaired with an oil-based primer that will protect it from moisture. After that, you can apply the waterproof wood sealant.

The Won't open

There are a variety of reasons windows don't open. The house could have settled or the wooden frames might have warped due to humid weather. Somebody may have nailed them shut for security. With a little patience and the right tools you can open most stuck windows.

Gunk or debris that has accumulated can be a major cause of a window not opening. Acme Glass notes that dirt and grime accumulates over time on sliding tracks, hinges and locks. In addition, metal hardware is prone to rust when it comes into contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease will help prevent corrosion and keep your window functioning correctly.

The pulleys that raise or lower the window can become loose, or break. These components can lose their tension and cause obstruction particularly when the window is situated two or more stories higher than the ground.

If you have difficulty opening a door, you can use a pry-bar to gently push the window open. Place a block of wood on the frame to give the pry bar more leverage. Also, be careful not to scratch the window or the wood. You can also try running a hair dryer around the edges of the frame for a few minutes to warm the wood and allow it move more easily.

A damaged spring can be the cause of a window that won't lift or lower. Based on the manufacturer of your windows, you'll be required to refer to the manual of your owner for additional instructions.

If you've tried cleaning the moving parts of your windows and lubricating them, but they still won't open it could be the right time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home go from being functional to unusable. If your windows aren't properly shut could leave your home vulnerable for burglary and water damages. Contact our team for more information on our windows replacement services and products today!