Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. However, if windows with double panes are anchored by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window repairs near me frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any shards fall on the fabric rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a variety of issues such as sliding. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need to open the window to get to the frame. You can then unscrew both the hinges on the top and Window Repairs bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you have moved your hinges. If you are happy with the size of the window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. The majority of the time it is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's crucial to take action. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the issue is, old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are brittle to open, or loose and open in a breeze it could be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It is very easy to replace a hinge on a window but it's much simpler if you have someone to help hold the frame.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window improperly or by a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to provide suggestions.

It is also important to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become misaligned due to wear, creating gaps where the sash meets frame. If they are beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could be disaligned. This is located on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a life span and there may come an point at which it is more economical to replace them than repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as you can.