Window Repairs

Window repairs can help homeowners save money and ensure their comfort. In the event of serious damage, such as broken glass or a cracked frame, a window replacement could be necessary.

Many other problems can be fixed to extend the longevity of windows. Some common problems include:

Broken or Window Replacement cracked panes

If it's an unintentional rock thrown by your lawnmower or a tree branch blown by strong winds, cracked window glass is not only ugly, but it can also result in higher electric bills since the broken pieces allow cold air to enter your home. Fortunately, it's generally easy to repair windows that have cracked panes.

Begin by carefully removing the glass using gloves and sunglasses. You may have to use a utility knife to break loose any remaining putty or glazing compound that has accumulated around the edges of the frame. Then, clean the glass's surface and the wood of the frame with a soft cloth or paper towel.

Once the area is clean then apply a waterproof silicone caulking around the frame's perimeter. This helps prevent water from getting into the crack, which can cause further damage to the frame and the glass.

If you have double-pane glass cracks that are severe could damage the gas layer between the panes, making your windows less efficient in insulating. If the crack is significant enough to cause damage to the quality of the glass or in the case of an inner pane that's totally missing, it's the time to call a professional.

Cracks caused by thermal stress can occur when there's a significant temperature difference both inside and outside your home. This causes the glass to expand and shrink. If the cracks are located on two sides of a glass, it is best to replace it instead of try to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready for replacement. It can also keep out cold and bugs. You can even cut a piece of nylon stocking or tarp sufficient to cover the crack and stick it to the wall using duct tape. This isn't an indefinite solution, but it can keep cold air out and insects away from your home. If you notice cracks or blemishes on the windows of your old ones, you should check with the local company to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is among the most frequent issues with windows. It can affect the appearance of a house and can also be danger to your safety. It is possible to repair rotted wood. The first step is to ensure that the source of the rot has been addressed. Look for leaks on the roof and other places where water can enter the wood.

The next step is to take out any rotten parts of the window frame. This can be done with a claw hammer, chisel, or rasp. Once the rotten areas have been removed it is time to replace them with new wood. It is recommended to make use of pre-treated wood for this task as it will be resistant to rot. If you are not able to replace the wood damaged by rot, you can try using wood hardener or filler to repair the damaged area. The majority of hardware stores sell this kind of product. To achieve the best results, make sure you follow the instructions on the product label.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. You can do this by applying a water-resistant wood sealant. Sikkens for instance is a fantastic product to use.

Use a two-part epoxy in order to protect the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, it's important that you adhere to the instructions for application on the label. After the epoxy filler is dry, you can rub the wood's surface. Start with a rough sandpaper, then move on to an easier grade.

You don't want to expose your damaged area to more moisture. It is recommended, so, to cover the surface repaired with an oil-based primer which will shield it from moisture. Then, you can apply waterproof wood sealant.

The W won't let you open

There are a variety of reasons windows don't open. Wood frames can warp when exposed to wet weather, the house could have settled or someone may have nailed it shut to protect themselves. With a bit of patience and the right tools, you can open most stuck windows.

Gunk or debris that has accumulated can be a major cause of a window not opening. The buildup of dirt and grime on the sliding tracks, hinges and locks over time, says Acme Glass. Metal hardware can also rust when it comes in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can help to prevent corrosion and keep your window operating correctly.

The pulleys that raise or Window Replacement lower the window can be loosened, or break. These parts can be weakened and obstructed when they are situated two or more floors higher than the surface.

If you're having trouble opening the window replacement Try using a pry bar to gently push the window open a little at a time. Place a block of wood on the frame to give the pry bar more leverage, and be careful not to damage the window or wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

Another issue with windows that won't open is a broken spring that keeps the window jamb from rising or lowering. You will need to consult the owner's manual for additional details based on the manufacturer of your windows.

If you've tried cleaning the moving parts of your windows and lubricating them, but they're still unable to open It could be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows in your home go from functional to useless. A window that isn’t properly shut can expose your home to burglary and water damages. Contact our team today for more information about our replacement windows and services!