Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They don't decay or rust as timber and aluminum.

It is essential to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However when you have double pane windows that are held in place by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or window repairs duct tape to stop water and drafts from entering the home until a professional comes out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap between the window and the door is large, you might want to use an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sliding. A sagging window in upvc window repairs near me can cause issues with light, draughts, and even security. It's important to take action when you notice your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and window repairs draughtproof.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it could also be due to the mechanism of the handle getting worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and perform an experiment fit. The joint at the corner of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is crucial to take action if you awake each day to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is an easy fix that can be done by any DIYer who is competent. Depending on how severe the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease, it may be hinges that are at the fault. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to replace a hinge on a window, but it's easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation in the factory. Sending us a photo through our website can often resolve the problem. We are happy to offer suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. First, the hinges because of wear and tear, could become misaligned. This can cause a gap to form where the sash joins the frame. If they are damaged beyond repair, it may be required to realign them. The interlock may be disaligned. This is located on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace these.

The next most common cause of draughts is the window seals. These can become worn down or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come a point where it is more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.