Window Repairs

Window repairs can help homeowners save money while maintaining their comfort. In the event of major damages such as broken glass or a cracked frame, window replacement may be necessary.

However, many other issues can be fixed to prolong the life of your windows. Common problems include:

Cracked or broken Panes

If it's an unintentional rock that was tossed by your lawnmowers or a tree's branch blown by strong winds, cracked window repair glass isn't just visually unappealing, but also can result in more expensive electricity bills because the broken pieces allow cold air into your home. Luckily, it's usually relatively easy to repair windows that have broken panes.

Start by carefully removing glass using gloves and sunglasses. You may have to use an utility knife to loosen old glazing compound or putty around the frame's edges. Then, use a gentle paper towel or cloth to clean the glass's surface and wood of the frame.

Once the area is clean, apply a waterproof silicone caulking around the frame's perimeter. This will prevent water from leaking into the frame through the crack and result in further damage.

A bad crack in double-paned glass could compromise the gas between the panes, making your windows less insulative. If the crack is severe enough to threaten the integrity of the glass, or the glass has an inner pane that's completely missing, it might be the time to call a professional.

Thermal stress cracks can also occur when there's a significant difference in temperatures between the inside and outside of your home, causing the glass to expand or contract. If this happens across two windows it's best to replace the window repair rather than trying to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready for replacement. It also keeps out cold and bugs. You can also cut a piece of nylon stocking or tarp sufficient to cover the crack and glue it in place with duct tape. This isn't a long-term solution however it's a great solution in a pinch and it keeps cold air and insects away from your home. If you notice cracks appearing on the windows of your old ones it is recommended to contact your local business to determine whether replacing the entire upvc window repair near me is a better solution.

Rotten Wood

Wood rot is one of the most common problems with windows. It can damage a home's appearance and create a safety risk. It is possible to fix damaged wood. It is first necessary to identify the cause of the wood decay. Look for leaks on the roof and other places that water may get into the wood.

The next step is to take out any rotten parts of the window frame. This can be done with the use of a chisel, rasp or claw hammer. After the rotten areas have been eliminated then you must replace them with new wood. It is recommended to choose treated wood for this project since it is more resistant to rot. If you are not able to replace the rotted timber you can apply filler and wood hardener to strengthen the damaged area. The majority of hardware stores have this type of product. To get the best results, follow the instructions on the product label.

After you have repaired the damaged areas of the window sill, it is important that you protect the area. Apply a water-resistant sealant to the wood. Sikkens, window Repair for example is a fantastic product to apply.

Make use of a two-part epoxy to safeguard the wood from further damage. It is simple to apply and gives a good finish. It is important to follow the instructions on the label. Once the epoxy filler has dried you can sand the surface of the wooden. Start with a rough sandpaper, then move to a smoother grade.

You don't want to expose your rotted part to more moisture. It is therefore an ideal idea to cover the repaired area with an oil-based primer that will shield it from moisture. Then, you can reapply the waterproof wood sealant.

The W won't let you open

A window that isn't opening can be caused by a variety of factors. Wood frames can warp during rainy weather, or the house may have settled or someone may have nailed it shut for security reasons. However, with a bit of patience and the right tools, many windows that are stuck can be opened.

Gunk or window repair debris that has accumulated can be a major cause of a window not opening. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks and locks. In addition, metal hardware can be rusty when it comes in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease will help prevent oxidation and keep your window functioning correctly.

Stuck windows can be caused by an unintentional break or loosening of the pulleys used to lift and lower the window. These components may lose tension and get blocked particularly when the window is situated at least two stories above the ground.

If you are having difficulty opening a door, you can use a pry-bar to gently open the window. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. You can also try running a hair dryer across the edges of the frame for a few minutes to warm the wood and allow it to move more easily.

Another common issue with windows that don't open is a defective spring that stops the window jamb from rising or lowering. Based on the manufacturer of your windows, you will be required to refer to your owner's manual for further instructions.

If you've tried cleaning and lubricating the moving parts on your windows, but they cannot open, it may be time to replace them. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let windows in your home go from being functional to inoperable. If a window isn't properly shut can expose your home to burglary and water damages. Contact our team today for more information on our replacement windows and our services!