Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled under.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you may be interested in a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in place.

If you are unable to move the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's important to replace the seal as fast as possible so that your upvc Window Repair windows are watertight and secure from draughts.

uPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need close the window and then perform an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks from windows can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window repair leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking might need to be removed before a new layer can be put on. When it comes to uPVC repair, it is important to avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to remember that if the leak originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open in a breeze It could be hinges that are at fault. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window repair near me is essentially a simple process but it can be simpler if you have someone to assist in holding the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrow on each hinge, this shows which way the window should open.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, may become displaced, Upvc Window Repair which can cause a gap to form between the sash and the frame. If they are beyond repair, it might be required to realign them. The interlock may also become misaligned. This happens on the hinge's side, and may need to be cleaned. In some cases it is possible to replace these.

The second most frequent cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to recognize that all windows have a life span and there may come a point where it is more efficient to replace them than repair them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as you can.